What time frame for completion?
BC
-----Original Message-----
From: george & del <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Tuesday, August 01, 2000 9:47 AM
Subject: Re: Rod question
>Just Looked in Hook & Hackle's catalog and they have a 10' 5 wt, blank,
>costs 70.85. I would ask for the Black Label and wait for it. It would be
>made by Loomis and as I said, to H&H specifications which I strongly
suspect
>are right off the RPL or SP. Total cost of 10' 5 wt would be approximately
>225.00. George
>----- Original Message -----
>From: "Bruce E. Carpenter" <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Sent: Tuesday, August 01, 2000 9:07 AM
>Subject: Re: Rod question
>
>
>> Can you build me a 10 ft. 5wt.?
>> BC
>>
>> -----Original Message-----
>> From: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>> Date: Tuesday, August 01, 2000 8:00 AM
>> Subject: Re: Rod question
>>
>>
>> ><<I'm Rod Builder from Whidbey Island. I have been at this for over 18
>> years.
>> >
>> >I have customers in Norway, St Louis, Florida, California, Idaho, Utah,
>> >
>> >Montana and Matzelan Mexico besides here in the Seattle area and Whidbey
>> >
>> >Island. I always use Sage for my Top End examples.>>
>> >
>> >George, thanks for your input. I, too, use Sage on my rods but there
are
>a
>> >lot of folks who can't/won't pay that much for a rod and thus my request
>> for
>> >some good intermediate brand names that will lower the overall cost.
>Have
>> >you ever used any other brands?
>> >
>> >Mike
>> >
>> >
>>
>>
>
>
