Hi Diana, When you need to charge your remote, an alert appears on your TV. At any time, you can check your remote's charge. Just go to Settings > Remotes and Devices > Remote and select your remote.
Kind Regards, Ronni Ronni Brown’s iPad Pro 12.9-inch 256GB > On 24 Mar 2018, at 8:55 pm, Diana & Graham Stevens <[email protected]> > wrote: > > Thanks Ronni > > I shall file that away for future reference. > > I think it was just a case of insufficient charge. I rebooted the Modem and > Time Capsule and the next time I tried the ATV the light didn’t come on. > Plugged it in, problem solved. Must have had just enough charge to work > occasionally. > > If it plays up when it is fully charged I’ll reset as suggested. > > Is there any way of checking the level of charge like you can with mice? > > Best wishes from Diana > Sent from my iPad > >> On 24 Mar 2018, at 8:26 pm, Ronni Brown <[email protected]> wrote: >> >> Hi Diana, >> >> Good to hear your problem has been sorted. I was going to suggest you Reset >> your Apple Remote. >> How to reset your Siri Remote >> If your remote is out of battery, misbehaving, or you want to move it to a >> new Apple TV, you can reset it by doing the following: >> >> • Simultaneously press the Menu and Volume Up buttons. >> • Hold for 2-3 seconds. >> • Your remote should reset and return to pairing mode. >> >> Cheers, >> Ronni >> >> 13-inch MacBook Air (April 2014) >> 1.7GHz Dual-Core Intel Core i7, Turbo Boost to 3.3GHz >> 8GB 1600MHz LPDDR3 SDRAM >> 512GB PCIe-based Flash Storage >> >> macOS High Sierra 10.13.3 >> >> >>> On 24 Mar 2018, at 7:56 pm, Diana & Graham Stevens <[email protected]> >>> wrote: >>> >>> Solved, it was the remote, all well now. >>> >>> Diana >>> >>> Sent from my iPad >>> >>>> On 24 Mar 2018, at 12:29 pm, Diana & Graham Stevens <[email protected]> >>>> wrote: >>>> >>>> I’m not sure this will get through as I haven’t paid because we are having >>>> severe financial problems, so fingers crossed. >>>> >>>> The ATV4 did not turn on, no light. I unplugged and waited a few minutes >>>> replugged, it turned on and showed a screen which looked slightly >>>> different to usual (but maybe normally I don’t see the top part). But I >>>> can’t do anything from the remote except change the volume. This indicates >>>> it is not a problem with the remote. >>>> >>>> Also the screens on the Panasonic TV looked slightly different, some >>>> options greyed out. So this morning I unplugged the power board which has >>>> all the TVs etc connected waited and plugged in again. This fixed the >>>> Panasonic but the ATV is the same. >>>> >>>> Is there any way of doing a reset without being able to access settings? >>>> >>>> Any suggestions gratefully accepted. Incidentally I greatly regret leaving >>>> WAMUG after so long. >>>> >>>> Diana >>>> >>>> Sent from my iPad
-- The WA Macintosh User Group Mailing List -- Archives - <http://www.wamug.org.au/mailinglist/archives.shtml> Guidelines - <http://www.wamug.org.au/mailinglist/guidelines.shtml> Settings & Unsubscribe - <http://lists.wamug.org.au/listinfo/wamug.org.au-wamug>
