As I believe Joseph has mentioned earlier, it may simply be a matter of installation order. Almost all USB hardware I've installed recently is adamant about installing the software/drivers _first_, then plugging in the device. If the device was plugged in when you ran the XP upgrade, or while installing the drivers, it may not be recognized (HP and Lexmark All-In-One printers are notorious for this). Try physically disconnecting the device, then go into Add/Remove and remove any software which might have been installed, then go into Device Manager and remove the device itself from the list. Reboot, then install the software from the media, or copy the install to your HD and install from there. Then (I had to do this to get a JumpDrive recognized) shut down the system, plug in the reader, and restart the system. If all goes well XP should recognize the drive on startup and show a dialog saying "Installing software for your new hardware." Good luck! ____ � The WDVL Discussion List from WDVL.COM � ____ To Join wdvltalk, Send An Email To: mailto:[EMAIL PROTECTED] or use the web interface http://e-newsletters.internet.com/discussionlists.html/ Send Your Posts To: wdvltalk@lists.wdvl.com To change subscription settings, add a password or view the web interface: http://intm-dl.sparklist.com/read/?forum=wdvltalk
________________ http://www.wdvl.com _______________________ You are currently subscribed to wdvltalk as: archive@jab.org To unsubscribe send a blank email to [EMAIL PROTECTED] To unsubscribe via postal mail, please contact us at: Jupitermedia Corp. Attn: Discussion List Management 475 Park Avenue South New York, NY 10016 Please include the email address which you have been contacted with.
