The 824 can do that. Kepa Zubeldia
On Monday 22 September 2003 08:49 am, [EMAIL PROTECTED] wrote: > Once you have the right format for the 4010A1 file, you then have to decipher > the 997 file. When a file is rejected, you get a line number along with a > segment name. > > If the segment is N3, that could be for any address on any claim. Most people > have a temporary claim file that gets transmitted to the carrier. Once > received, it gets deleted. I could be remade and then you can get to the line number. > > Would it be possible to get them to change the line number to the loop > number, i.e. 2310D? > How does someone go about this? > > Ken Katz > ICS Software, Ltd. > 3389 Long Beach Road > Oceanside, NY 11572 > Tel: 516-766-2129, Fax (516) 763-1017 > email: [EMAIL PROTECTED] > email: [EMAIL PROTECTED] > website: www.sammy2000.com > website: www.simplesam.net --- The WEDI SNIP listserv to which you are subscribed is not moderated. The discussions on this listserv therefore represent the views of the individual participants, and do not necessarily represent the views of the WEDI Board of Directors nor WEDI SNIP. If you wish to receive an official opinion, post your question to the WEDI SNIP Issues Database at http://snip.wedi.org/tracking/. These listservs should not be used for commercial marketing purposes or discussion of specific vendor products and services. They also are not intended to be used as a forum for personal disagreements or unprofessional communication at any time. You are currently subscribed to wedi-transactions as: [EMAIL PROTECTED] To unsubscribe from this list, go to the Subscribe/Unsubscribe form at http://subscribe.wedi.org or send a blank email to [EMAIL PROTECTED] If you need to unsubscribe but your current email address is not the same as the address subscribed to the list, please use the Subscribe/Unsubscribe form at http://subscribe.wedi.org
