Here is a link for values I write both preassure and rain rate and below data from weewx. When I manually start weewx I get some errors so half is with manually starting weewx and half when restart weewx.
http://zerobin.povej.net/?2b67951062395755#msXGtrC6ARHSBTBUCDj5qdeV920nG2FzZbloR3nozAI= Dne četrtek, 21. september 2017 19.43.59 UTC+2 je oseba mwall napisala: > > On Tuesday, September 19, 2017 at 7:54:35 AM UTC-4, Damjan Hajsek wrote: >> >> About preassure, I use absolute preassure which is higher than sea level >> preassure, my altitude is 293m (I have this setting in weewx.conf). When I >> checked my absolute preassure it was about 1008mbar until sea level was I >> think about 995mbar. But I have always set to absoulte preassure and when >> is absoulte preassure 1010mbar weewx shows 1008 mbar. >> >> Dne torek, 19. september 2017 13.38.51 UTC+2 je oseba mwall napisala: >>> >>> >>> regarding pressure, are you comparing apples to apples? is the console >>> reporting gauge pressure or sea level pressure? what is the station >>> altitude? >>> >> > run weewx directly. > > post the output from a few LOOP packets, not the log output. for each > LOOP packet you post, also post the value for pressure that was displayed > on the console at the time of that LOOP packet. > > m > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
