here are loop packets again, before I forget to disable calibration http://zerobin.povej.net/?170843575d112ab6#m8n6suRJmh/WbTp9FTuSxwETZKDodPNnJQbQ4R4h4bw=
Dne ponedeljek, 25. september 2017 21.54.07 UTC+2 je oseba Damjan Hajsek napisala: > > Here are packet I hope this time I get right packets. > > > http://zerobin.povej.net/?617f993cae15cb3f#c/uDiL2ZHhGvTFQQ8sZgY0ILHUuhFKcBVsB/rFdxdE8= > > > > Dne petek, 22. september 2017 13.55.41 UTC+2 je oseba Andrew Milner > napisala: >> >> Where are the LOOP and REC packets?? They are not in the file you >> posted. >> >> >> >> On Friday, 22 September 2017 14:28:02 UTC+3, Damjan Hajsek wrote: >> >>> Here is a link for values I write both preassure and rain rate and below >>> data from weewx. >>> When I manually start weewx I get some errors so half is with manually >>> starting weewx and half when restart weewx. >>> >>> >>> http://zerobin.povej.net/?2b67951062395755#msXGtrC6ARHSBTBUCDj5qdeV920nG2FzZbloR3nozAI= >>> >>> >>> >>> Dne četrtek, 21. september 2017 19.43.59 UTC+2 je oseba mwall napisala: >>>> >>>> On Tuesday, September 19, 2017 at 7:54:35 AM UTC-4, Damjan Hajsek wrote: >>>>> >>>>> About preassure, I use absolute preassure which is higher than sea >>>>> level preassure, my altitude is 293m (I have this setting in weewx.conf). >>>>> When I checked my absolute preassure it was about 1008mbar until sea >>>>> level >>>>> was I think about 995mbar. But I have always set to absoulte preassure >>>>> and >>>>> when is absoulte preassure 1010mbar weewx shows 1008 mbar. >>>>> >>>>> Dne torek, 19. september 2017 13.38.51 UTC+2 je oseba mwall napisala: >>>>>> >>>>>> >>>>>> regarding pressure, are you comparing apples to apples? is the >>>>>> console reporting gauge pressure or sea level pressure? what is the >>>>>> station altitude? >>>>>> >>>>> >>>> run weewx directly. >>>> >>>> post the output from a few LOOP packets, not the log output. for each >>>> LOOP packet you post, also post the value for pressure that was displayed >>>> on the console at the time of that LOOP packet. >>>> >>>> m >>>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
