I did this, first half of report is maded like that but obvously something was wrong. I stopped weewx service and did that manually. I will do it again and report.
Dne petek, 22. september 2017 13.52.11 UTC+2 je oseba mwall napisala: > > On Friday, September 22, 2017 at 7:28:02 AM UTC-4, Damjan Hajsek wrote: >> >> Here is a link for values I write both preassure and rain rate and below >> data from weewx. >> When I manually start weewx I get some errors so half is with manually >> starting weewx and half when restart weewx. >> >> >> http://zerobin.povej.net/?2b67951062395755#msXGtrC6ARHSBTBUCDj5qdeV920nG2FzZbloR3nozAI= >> > > > damjan, > > by now it should be obvious that you cannot run two instances of weewx at > the same time when they both try listen on port 9999; you must stop any > weewx daemon before you run weewx directly. > > in order to diagnose values from sensors, we need to see LOOP (and > possibly REC) values. to do this you must run weewx directly, i.e., not as > a daemon: > > http://weewx.com/docs/usersguide.htm#Running_directly > > when you run weewx directly it display sensor values as soon as it > receives them from the hardware. > > while weewx is running, you must look at the weather station console and > write down the values you see at the time of each LOOP packet. > > then post the LOOP output and the values you wrote down from the console. > > it would also help if you would explain what you expect to see, otherwise > we don't know whether there is a problem with weewx or an 'education' > problem. > > m > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
