Where are the LOOP and REC packets?? They are not in the file you posted.
On Friday, 22 September 2017 14:28:02 UTC+3, Damjan Hajsek wrote: > Here is a link for values I write both preassure and rain rate and below > data from weewx. > When I manually start weewx I get some errors so half is with manually > starting weewx and half when restart weewx. > > > http://zerobin.povej.net/?2b67951062395755#msXGtrC6ARHSBTBUCDj5qdeV920nG2FzZbloR3nozAI= > > > > Dne četrtek, 21. september 2017 19.43.59 UTC+2 je oseba mwall napisala: >> >> On Tuesday, September 19, 2017 at 7:54:35 AM UTC-4, Damjan Hajsek wrote: >>> >>> About preassure, I use absolute preassure which is higher than sea >>> level preassure, my altitude is 293m (I have this setting in weewx.conf). >>> When I checked my absolute preassure it was about 1008mbar until sea level >>> was I think about 995mbar. But I have always set to absoulte preassure and >>> when is absoulte preassure 1010mbar weewx shows 1008 mbar. >>> >>> Dne torek, 19. september 2017 13.38.51 UTC+2 je oseba mwall napisala: >>>> >>>> >>>> regarding pressure, are you comparing apples to apples? is the console >>>> reporting gauge pressure or sea level pressure? what is the station >>>> altitude? >>>> >>> >> run weewx directly. >> >> post the output from a few LOOP packets, not the log output. for each >> LOOP packet you post, also post the value for pressure that was displayed >> on the console at the time of that LOOP packet. >> >> m >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
