Here are packet I hope this time I get right packets. http://zerobin.povej.net/?617f993cae15cb3f#c/uDiL2ZHhGvTFQQ8sZgY0ILHUuhFKcBVsB/rFdxdE8=
Dne petek, 22. september 2017 13.55.41 UTC+2 je oseba Andrew Milner napisala: > > Where are the LOOP and REC packets?? They are not in the file you posted. > > > > On Friday, 22 September 2017 14:28:02 UTC+3, Damjan Hajsek wrote: > >> Here is a link for values I write both preassure and rain rate and below >> data from weewx. >> When I manually start weewx I get some errors so half is with manually >> starting weewx and half when restart weewx. >> >> >> http://zerobin.povej.net/?2b67951062395755#msXGtrC6ARHSBTBUCDj5qdeV920nG2FzZbloR3nozAI= >> >> >> >> Dne četrtek, 21. september 2017 19.43.59 UTC+2 je oseba mwall napisala: >>> >>> On Tuesday, September 19, 2017 at 7:54:35 AM UTC-4, Damjan Hajsek wrote: >>>> >>>> About preassure, I use absolute preassure which is higher than sea >>>> level preassure, my altitude is 293m (I have this setting in weewx.conf). >>>> When I checked my absolute preassure it was about 1008mbar until sea level >>>> was I think about 995mbar. But I have always set to absoulte preassure and >>>> when is absoulte preassure 1010mbar weewx shows 1008 mbar. >>>> >>>> Dne torek, 19. september 2017 13.38.51 UTC+2 je oseba mwall napisala: >>>>> >>>>> >>>>> regarding pressure, are you comparing apples to apples? is the >>>>> console reporting gauge pressure or sea level pressure? what is the >>>>> station altitude? >>>>> >>>> >>> run weewx directly. >>> >>> post the output from a few LOOP packets, not the log output. for each >>> LOOP packet you post, also post the value for pressure that was displayed >>> on the console at the time of that LOOP packet. >>> >>> m >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
