I must admit, I had a similar issue, for me I was locking up repeatedly weekly and then sometimes daily.
I started on a separate project to remove the lcd display from my WS, by using weewx-sdr, but it hasn't worked out well for me, see other threads. For me the solution has been very simple, as a post somewhere mentioned a similar issue, but their problem was a mechanical or quality issue releated to the internal wire antenna in the LCD display. I dismantled my lcd display and carefully re-routed the wire inside the lcd to avoid it being trapped by sharp edges of the case, and that has fixed it, I haven't had a lock up since. Worth considering ? Rgds Andy On Monday, 11 December 2017 22:54:03 UTC, Redanman wrote: > > My old WH1080 is getting more more and more USB hang-ups. I have to reset > the unit (remove the USB cable) to reboot the it. I obviously lose the > data in the circular buffer, so, depending on when I notice the hang-up, it > leads to data loss of several hours or even days. > I power the WH1080 through the USB cable connected to my Pi, but I do not > have a USB hub, so cannot cycle the power through the hub. I have noticed > that if I reboot the Pi it cycles the power on the Pi's own USB ports, so > resetting the WH1080. Is it possible to do this automatically within Weewx > if it detects a USB hang-up? > Mike -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
