The insides didn't really tell me much. The 433Mhz cable was pinched by the case as I've seen already mention here already, but not such that it was cut. The USB connectors are permanent covered by the lead plugs, so there is no reason why grime would get in. I had a look anyway and they are immaculate. I changed the USB cable a little while back, but that had no effect. I'll try a different power supply for the Pi as their performance can drop off with time or maybe I'll try and find a powered hub from somewhere.
On Monday, 11 December 2017 22:54:03 UTC, Redanman wrote: > > My old WH1080 is getting more more and more USB hang-ups. I have to reset > the unit (remove the USB cable) to reboot the it. I obviously lose the > data in the circular buffer, so, depending on when I notice the hang-up, it > leads to data loss of several hours or even days. > I power the WH1080 through the USB cable connected to my Pi, but I do not > have a USB hub, so cannot cycle the power through the hub. I have noticed > that if I reboot the Pi it cycles the power on the Pi's own USB ports, so > resetting the WH1080. Is it possible to do this automatically within Weewx > if it detects a USB hang-up? > Mike -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
