Would it worth renewing the pinched 433Mhz wire antenna, and routing it carefully to avoid future pinching ?
On Friday, 15 December 2017 14:30:30 UTC, Redanman wrote: > > The insides didn't really tell me much. The 433Mhz cable was pinched by > the case as I've seen already mention here already, but not such that it > was cut. The USB connectors are permanent covered by the lead plugs, so > there is no reason why grime would get in. I had a look anyway and they > are immaculate. I changed the USB cable a little while back, but that had > no effect. I'll try a different power supply for the Pi as their > performance can drop off with time or maybe I'll try and find a powered hub > from somewhere. > > On Monday, 11 December 2017 22:54:03 UTC, Redanman wrote: >> >> My old WH1080 is getting more more and more USB hang-ups. I have to >> reset the unit (remove the USB cable) to reboot the it. I obviously lose >> the data in the circular buffer, so, depending on when I notice the >> hang-up, it leads to data loss of several hours or even days. >> I power the WH1080 through the USB cable connected to my Pi, but I do not >> have a USB hub, so cannot cycle the power through the hub. I have noticed >> that if I reboot the Pi it cycles the power on the Pi's own USB ports, so >> resetting the WH1080. Is it possible to do this automatically within Weewx >> if it detects a USB hang-up? >> Mike > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
