Sorry for my extremelly late response. It is still a problem with UV value
driver is Interceptor
driver = weewx.drivers.acurite
LOOP: 2018-04-10 10:16:49 CEST (1523348209) altimeter: 29.728946262,
appTemp: 54.3988471307, barometer: 29.7445129684, cloudbase: 1023.64799442,
dateTime: 1523348209, dewpoint: 53.24, heatindex: 53.42, humidex:
57.2526191519, inDewpoint: 56.3317947215, inHumidity: 59.0, inTemp: 71.42,
maxSolarRad: None, outHumidity: 99.0, outTemp: 53.42, pressure:
28.7178464013, radiation: 103.709636, rain: None, rainRate: 0.0, usUnits:
1, UV: 472.0, windchill: 53.42, windDir: None, windGust: 0.0, windGustDir:
None, windSpeed: 0.0
LOOP: 2018-04-10 10:17:05 CEST (1523348225) altimeter: 29.728946262,
appTemp: 54.3988471307, barometer: 29.7445129684, cloudbase: 1023.64799442,
dateTime: 1523348225, dewpoint: 53.24, heatindex: 53.42, humidex:
57.2526191519, inDewpoint: 56.3317947215, inHumidity: 59.0, inTemp: 71.42,
maxSolarRad: None, outHumidity: 99.0, outTemp: 53.42, pressure:
28.7178464013, radiation: 105.383024, rain: 0.0, rainRate: 0.0, usUnits: 1,
UV: 487.0, windchill: 53.42, windDir: None, windGust: 0.0, windGustDir:
None, windSpeed: 0.0
LOOP: 2018-04-10 10:17:16 CEST (1523348236) altimeter: 29.7350372327,
appTemp: 54.3988471307, barometer: 29.7506458577, cloudbase: 1023.64799442,
dateTime: 1523348236, dewpoint: 53.24, heatindex: 53.42, humidex:
57.2526191519, inDewpoint: 56.3317947215, inHumidity: 59.0, inTemp: 71.42,
maxSolarRad: None, outHumidity: 99.0, outTemp: 53.42, pressure:
28.7237676067, radiation: 105.383024, rain: 0.0, rainRate: 0.0, usUnits: 1,
UV: 487.0, windchill: 53.42, windDir: None, windGust: 0.0, windGustDir:
None, windSpeed: 0.0
REC: 2018-04-10 10:17:00 CEST (1523348220) altimeter: 29.728946262,
appTemp: 54.3988471307, barometer: 29.7445129684, cloudbase: 1023.64799442,
dateTime: 1523348220.0, dewpoint: 53.24, ET: 5.55883840061e-05, heatindex:
53.42, humidex: 57.2526191519, inDewpoint: 56.3317947215, inHumidity: 59.0,
inTemp: 71.42, interval: 1, maxSolarRad: None, outHumidity: 99.0, outTemp:
53.42, pressure: 28.7178464013, radiation: 103.709636, rain: 0.0, rainRate:
0.0, usUnits: 1, UV: 472.0, windchill: 53.42, windDir: None, windGust: 0.0,
windGustDir: None, windrun: 0.0, windSpeed: 0.0
LOOP: 2018-04-10 10:17:21 CEST (1523348241) altimeter: 29.7350372327,
appTemp: 54.3988471307, barometer: 29.7506458577, cloudbase: 1023.64799442,
dateTime: 1523348241, dewpoint: 53.24, heatindex: 53.42, humidex:
57.2526191519, inDewpoint: 56.3317947215, inHumidity: 59.0, inTemp: 71.42,
maxSolarRad: None, outHumidity: 99.0, outTemp: 53.42, pressure:
28.7237676067, radiation: 107.3910896, rain: 0.0, rainRate: 0.0, usUnits:
1, UV: 503.0, windchill: 53.42, windDir: None, windGust: 0.0, windGustDir:
None, windSpeed: 0.0
LOOP: 2018-04-10 10:25:21 CEST (1523348721) altimeter: 29.7319917482,
appTemp: 54.3988471307, barometer: 29.747579413, cloudbase: 1023.64799442,
dateTime: 1523348721, dewpoint: 53.24, heatindex: 53.42, humidex:
57.2526191519, inDewpoint: 56.3317947215, inHumidity: 59.0, inTemp: 71.42,
maxSolarRad: None, outHumidity: 99.0, outTemp: 53.42, pressure:
28.720807004, radiation: 150.8991776, rain: 0.0, rainRate: 0.0, usUnits: 1,
UV: 796.0, windchill: 53.42, windDir: None, windGust: 0.0, windGustDir:
None, windSpeed: 0.0
REC: 2018-04-10 10:25:00 CEST (1523348700) altimeter: 29.7319917482,
appTemp: 54.3988471307, barometer: 29.747579413, cloudbase: 1023.64799442,
dateTime: 1523348700.0, dewpoint: 53.24, ET: 5.95042263045e-05, heatindex:
53.42, humidex: 57.2526191519, inDewpoint: 56.3317947215, inHumidity: 59.0,
inTemp: 71.42, interval: 1, maxSolarRad: None, outHumidity: 99.0, outTemp:
53.42, pressure: 28.720807004, radiation: 145.1166924, rain: 0.0, rainRate:
0.0, usUnits: 1, UV: 754.0, windchill: 53.42, windDir: None, windGust: 0.0,
windGustDir: None, windrun: 0.0, windSpeed: 0.0
LOOP: 2018-04-10 10:25:37 CEST (1523348737) altimeter: 29.7319917482,
appTemp: 54.6328953667, barometer: 29.7472129727, cloudbase: 1023.69795672,
dateTime: 1523348737, dewpoint: 53.42, heatindex: 53.6, humidex:
57.5251059501, inDewpoint: 56.3317947215, inHumidity: 59.0, inTemp: 71.42,
maxSolarRad: None, outHumidity: 99.0, outTemp: 53.6, pressure:
28.720807004, radiation: 152.6283452, rain: 0.0, rainRate: 0.0, usUnits: 1,
UV: 806.0, windchill: 53.6, windDir: None, windGust: 0.0, windGustDir:
None, windSpeed: 0.0
____________________________________________________________________________________________________________________________________________________________________________
debug
wee_debug --info
Using verbosity=1, displaying most info
wee_debug output will be sent to stdout(console)
Using configuration file /etc/weewx/weewx.conf
Using database binding 'wx_binding', which is bound to database
'archive_mysql'
System info
Platform:
Linux-3.10.0-693.21.1.el7.x86_64-x86_64-with-centos-7.4.1708-Core
Python Version: 2.7.5
Load Information
1 minute load average: 1.22
5 minute load average: 4.96
15 minute load average: 18.68
General Weewx info
Weewx version 3.8.0 detected.
Station info
Station type: Interceptor
Driver: user.interceptor
Driver info
[Interceptor]
# This section is for the network traffic interceptor driver.
# The driver to use:
driver = user.interceptor
# Specify the hardware device to capture. Options include:
# acurite-bridge - acurite internet bridge
# observer - fine offset WH2600/HP1000/HP1003, aka 'observer'
# lw30x - oregon scientific LW301/LW302
# lacrosse-bridge - lacrosse GW1000U/C84612 internet bridge
device_type = observer
port = 9999
Currently installed extensions
Extension Name Version Description
interceptor 0.36 Capture weather data from HTTP requests
forecast 3.2.17 Generate and display weather and tide forecasts.
Archive info
Database name: weewx
Table name: archive
Unit system: 1 (US)
First good timestamp: 2017-09-16 00:50:00 CEST (1505515800)
Last good timestamp: 2018-04-10 10:25:00 CEST (1523348700)
Number of records: 213493
weewx (weewx.conf) is set to use an archive interval of 60 seconds.
The station hardware was not interrogated in determining archive interval.
Databases configured in weewx.conf
Database name: weewx.sdb
Database driver: weedb.sqlite
Database name: weewx
Database driver: weedb.mysql
Database host: localhost
Database name: forecast.sdb
Database driver: weedb.sqlite
Parsed and obfuscated weewx.conf
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2015 Tom Keffer <[email protected]>
# See the file LICENSE.txt for your rights.
##############################################################################
# This section is for general configuration information.
# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 1
# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /
# How long to wait before timing out a socket (FTP, HTTP) connection
socket_timeout = 20
# Do not modify this. It is used when installing and updating weewx.
version = 3.8.0
##############################################################################
# This section is for information about the station.
[Station]
# Description of the station location
location = Slovenia - Ljubljana
# Latitude and longitude in decimal degrees
latitude = 46.1299910
longitude = 14.6003179
# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 293, meter # Choose 'foot' or 'meter' for unit
# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be
used.
station_type = Interceptor
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 0
# If you have a website, you may specify an URL
station_url = XXX obfuscated by wee_debug XXX
##############################################################################
[AcuRite]
# This section is for AcuRite weather stations.
# The station model, e.g., 'AcuRite 01025' or 'AcuRite 02032C'
model = AcuRite 01035
# The driver to use:
driver = weewx.drivers.acurite
##############################################################################
[FineOffsetUSB]
# This section is for the Fine Offset series of weather stations.
# The station model, e.g., WH1080, WS1090, WS2080, WH3081
model = WS2080
# How often to poll the station for data, in seconds
polling_interval = 300
# The driver to use:
driver = weewx.drivers.fousb
##############################################################################
[Simulator]
# This section is for the weewx weather station simulator
# The time (in seconds) between LOOP packets.
loop_interval = 2.5
# The simulator mode can be either 'simulator' or 'generator'.
# Real-time simulator. Sleep between each LOOP packet.
mode = simulator
# Generator. Emit LOOP packets as fast as possible (useful for
testing).
#mode = generator
# The start time. If not specified, the default is to use the present
time.
#start = 2011-01-01 00:00
# The driver to use:
driver = weewx.drivers.simulator
##############################################################################
[WS1]
# This section is for the ADS WS1 series of weather stations.
# Driver mode - tcp, udp, or serial
mode = tcp
# If serial, specify the serial port device. (ex. /dev/ttyS0,
/dev/ttyUSB0,
# or /dev/cuaU0)
# If TCP, specify the IP address and port number. (ex.
192.168.36.25:3000)
port = 192.168.1.200
# The amount of time, in seconds, before the connection fails if there
is
# no response
timeout = 3
# The driver to use:
driver = weewx.drivers.ws1
##############################################################################
# This section is for uploading data to Internet sites
[StdRESTful]
[[StationRegistry]]
# To register this weather station with weewx, set this to true
register_this_station = false
[[AWEKAS]]
# This section is for configuring posts to AWEKAS.
# If you wish to do this, set the option 'enable' to true,
# and specify a username and password.
enable = false
username = XXX obfuscated by wee_debug XXX
# To guard against parsing errors, put your password in quotes:
password = XXX obfuscated by wee_debug XXX
[[CWOP]]
# This section is for configuring posts to CWOP.
# If you wish to do this, set the option 'enable' to true,
# and specify the station ID (e.g., CW1234).
enable = false
station = XXX obfuscated by wee_debug XXX
# If this is an APRS (radio amateur) station, uncomment
# the following and replace with a passcode (e.g., 12345).
#passcode = replace_me (APRS stations only)
[[PWSweather]]
# This section is for configuring posts to PWSweather.com.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
enable = false
station = XXX obfuscated by wee_debug XXX
# To guard against parsing errors, put your password in quotes:
password = XXX obfuscated by wee_debug XXX
[[WOW]]
# This section is for configuring posts to WOW.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
enable = false
station = XXX obfuscated by wee_debug XXX
# To guard against parsing errors, put your password in quotes:
password = XXX obfuscated by wee_debug XXX
[[Wunderground]]
# This section is for configuring posts to the Weather Underground.
# If you wish to do this, set the option 'enable' to true,
# and specify a station (e.g., 'KORHOODR3') and password.
enable = true
station = XXX obfuscated by wee_debug XXX
# To guard against parsing errors, put your password in quotes:
password = XXX obfuscated by wee_debug XXX
# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = True
##############################################################################
# This section specifies what reports, using which skins, to generate.
[StdReport]
# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = /etc/weewx/skins
# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = /var/www/html/weewx
# The database binding indicates which data should be used in reports.
data_binding = wx_binding
# Each of the following subsections defines a report that will be run.
[[StandardReport]]
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and
other
# customizations. Many of those changes can be made here by
overriding
# parameters, or by modifying templates within the skin itself.
# The StandardReport uses the 'Standard' skin, which contains the
# images, templates and plots for the report.
skin = sofaskin
# MT Addition for forecast
[[[Units]]]
[[[[Groups]]]]
group_altitude = meter
group_speed2 = meter_per_second2
group_pressure = mbar
group_rain = mm
group_rainrate = mm_per_hour
group_temperature = degree_C
group_degree_day = degree_C_day
group_speed = meter_per_second
[[forecast]]
HTML_ROOT = /var/www/html/weewx/forecast
skin = forecast
[[FTP]]
# FTP'ing the results to a webserver is treated as just another
report,
# albeit one with an unusual report generator!
skin = Ftp
# If you wish to use FTP, uncomment and fill out the next four
lines.
#user = replace with the ftp username
#password = replace with the ftp password; put in quotes to guard
against parsing errors.
#server = replace with the ftp server name, e.g, www.threefools.org
#path = replace with the ftp destination directory (e.g., /weather)
# Set to True for an FTP over TLS (FTPS) connection. Not all servers
# support this.
secure_ftp = False
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Most FTP servers use port 21
port = 21
# Set to 1 to use passive mode, zero for active mode
passive = 1
[[RSYNC]]
# rsync'ing to a webserver is treated as just another report
skin = Rsync
# If you wish to use rsync, you must configure passwordless ssh
using
# public/private key authentication from the user account that weewx
# runs as to the user account on the remote machine where the files
# will be copied.
#
# The following three lines determine where files will be sent.
#server = replace with the rsync server name, e.g,
www.threefools.org
#path = replace with the rsync destination directory (e.g.,
/weather)
#user = replace with the rsync username
# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote
file
# deletion, zero to allow files to accumulate remotely.
delete = 0
##############################################################################
# This service acts as a filter, converting the unit system coming from
# the hardware to a unit system in the database.
[StdConvert]
# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of
units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.
# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
[StdCalibrate]
[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
# foo = foo + 0.2
radiation = radiation * 0.752
rainRate = rainRate * 0.1
#barometer = barometer * 10.0025
pressure = pressure * 1.002575
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
##############################################################################
# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.
[StdQC]
[[MinMax]]
barometer = 26, 32.5, inHg
outTemp = -40, 120, degree_F
inTemp = 10, 120, degree_F
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 120, mile_per_hour
pressure = 24, 34.5, inHg
##############################################################################
# This section controls the origin of derived values.
[StdWXCalculate]
[[Calculations]]
# Derived quantities are calculated by this service. Possible
values are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx
pressure = prefer_hardware
barometer = prefer_hardware
altimeter = prefer_hardware
windchill = prefer_hardware
heatindex = prefer_hardware
dewpoint = prefer_hardware
inDewpoint = prefer_hardware
rainRate = prefer_hardware
##############################################################################
# For hardware that supports it, this section controls how often the
# onboard clock gets updated.
[StdTimeSynch]
# How often to check the weather station clock for drift (in seconds)
clock_check = 14400
# How much it can drift before we will correct it (in seconds)
max_drift = 5
##############################################################################
# This section is for configuring the archive service.
[StdArchive]
# If the station hardware supports data logging then the archive
interval
# will be downloaded from the station. Otherwise, specify it (in
seconds).
archive_interval = 60
# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = software
# Whether to include LOOP data in hi/low statistics
loop_hilo = True
# The data binding used to save archive records
data_binding = wx_binding
##############################################################################
# This section binds a data store to a database.
[DataBindings]
[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
database = archive_mysql
#database = archive_sqlite
# The name of the table within the database
table_name = archive
# The manager handles aggregation of data for historical summaries
manager = weewx.wxmanager.WXDaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = schemas.wview.schema
[[forecast_binding]]
database = forecast_sqlite
##############################################################################
# This section defines various databases.
[Databases]
# A SQLite database is simply a single file
[[archive_sqlite]]
database_type = SQLite
database_name = weewx.sdb
# MySQL
[[archive_mysql]]
database_type = MySQL
database_name = weewx
[[forecast_sqlite]]
database_name = forecast.sdb
database_type = SQLite
##############################################################################
# This section defines defaults for the different types of databases.
[DatabaseTypes]
# Defaults for SQLite databases
[[SQLite]]
driver = weedb.sqlite
# Directory in which the database files are located
SQLITE_ROOT = /var/lib/weewx
# Defaults for MySQL databases
[[MySQL]]
driver = weedb.mysql
# The host where the database is located
host = localhost
# The user name for logging in to the host
user = XXX obfuscated by wee_debug XXX
# The password for the user name. Put in quotes to guard against
parsing errors.
password = XXX obfuscated by wee_debug XXX
##############################################################################
# This section configures the internal weewx engine.
[Engine]
[[Services]]
# This section specifies the services that should be run. They are
# grouped by type, and the order of services within each group
# determines the order in which the services will be run.
prep_services = weewx.engine.StdTimeSynch
data_services = ,
process_services = weewx.engine.StdConvert,
weewx.engine.StdCalibrate, weewx.engine.StdQC,
weewx.wxservices.StdWXCalculate
archive_services = weewx.engine.StdArchive,
user.forecast.ZambrettiForecast, user.forecast.NWSForecast,
user.forecast.WUForecast, user.forecast.OWMForecast,
user.forecast.UKMOForecast, user.forecast.AerisForecast,
user.forecast.WWOForecast, user.forecast.XTideForecast
restful_services = weewx.restx.StdStationRegistry,
weewx.restx.StdWunderground, weewx.restx.StdPWSweather,
weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
report_services = weewx.engine.StdPrint, weewx.engine.StdReport
##############################################################################
[Interceptor]
# This section is for the network traffic interceptor driver.
# The driver to use:
driver = user.interceptor
# Specify the hardware device to capture. Options include:
# acurite-bridge - acurite internet bridge
# observer - fine offset WH2600/HP1000/HP1003, aka 'observer'
# lw30x - oregon scientific LW301/LW302
# lacrosse-bridge - lacrosse GW1000U/C84612 internet bridge
device_type = observer
port = 9999
##############################################################################
# This section can adjust data using calibration expressions.
[1]
##############################################################################
[HP1000]
# This section is for the weewx HP1000 weather station driver
# The IP address mask to search for a weather station
# Define this if you DO NOT have the 'netifaces' Python
# package installed on your computer or you want to
# force the driver to use a specific broadcase address
#ip_address_mask = "10.1.1.255"
# The retry count for getting a response from the weather station
retry_count = 5
# Socket timeout value (seconds)
socket_timeout = 5
# Loop delay time (seconds)
# None or not specified means loop packets are generated as fast as
possible
# (approx every few seconds) and will increase network traffic volume
loop_delay = 15
# Number of times to try to access the network
max_retry = 3
# Number of seconds to wait between attempts to access the network
retry_wait = 5
# The driver to use:
driver = user.HP1000
##############################################################################
[Forecast]
data_binding = forecast_binding
[[WU]]
api_key = XXX obfuscated by wee_debug XXX # specify a weather
underground api_key
wee_debug report successfully generated
________________________________________________________________________________________________________________________________________________________________
Dne nedelja, 12. november 2017 15.10.07 UTC+1 je oseba mwall napisala:
>
> On Sunday, November 12, 2017 at 9:02:20 AM UTC-5, Damjan Hajsek wrote:
>>
>> It is aercus weather ranger and it is the same as ambient weather WS 1002
>> and on console I have UV index 1 on weewx it is 256.
>>
>
> what driver are you using?
>
> please post log output with debug=1
>
> please post some LOOP and REC data when running weewx directly
>
> m
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
