Here is my mapping:
[[sensor_map]]
# bridge
barometer = pressure.00001532.*
# tower
outTemp = temperature.00001532.*
outHumidity = humidity.00001532.*
windSpeed = windspeed.00001532.*
windDir = winddir.00001532.*
rain = rainfall.00001532.*
# Indoor Sensor (Backroom)
inTemp = temperature.00008397.*
inHumidity = humidity.00008397.*
On Saturday, October 27, 2018 at 3:32:24 PM UTC-4, Gabe wrote:
>
> More specifically, I have no idea how to setup the sensor_map section of
> weewx.conf, I don't know how to get the inTemp = temperature.06022.*
> sensor ids
>
> On Thursday, October 18, 2018 at 7:47:13 PM UTC-4, rich T wrote:
>>
>> Here is my configuration:
>>
>> Smarthub >(Port 1) Managed Switch (Port 2) > RP3
>>
>> Port 2 is mirror of Port 1. And used the weewx-interceptor driver to
>> process the data.
>>
>> On Wednesday, October 17, 2018 at 10:39:49 AM UTC-4, Gabe wrote:
>>
>>> Trying to see if I can get the smarthub connected directly into the Pi
>>> since I can't redirect DNS with Google Wifi (not enough advanced settings)
>>>
>>>
>>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
