Thanks! Works! Except Belchersking giving me Generate failed with exception '<type 'exceptions.ValueError'>'
but that's not related to acurite :) On Saturday, October 27, 2018 at 7:04:16 PM UTC-4, rich T wrote: > > Here is my mapping: > > [[sensor_map]] > > # bridge > > barometer = pressure.00001532.* > > # tower > > outTemp = temperature.00001532.* > outHumidity = humidity.00001532.* > windSpeed = windspeed.00001532.* > windDir = winddir.00001532.* > rain = rainfall.00001532.* > > # Indoor Sensor (Backroom) > > inTemp = temperature.00008397.* > inHumidity = humidity.00008397.* > > > > On Saturday, October 27, 2018 at 3:32:24 PM UTC-4, Gabe wrote: >> >> More specifically, I have no idea how to setup the sensor_map section of >> weewx.conf, I don't know how to get the inTemp = temperature.06022.* >> sensor ids >> >> On Thursday, October 18, 2018 at 7:47:13 PM UTC-4, rich T wrote: >>> >>> Here is my configuration: >>> >>> Smarthub >(Port 1) Managed Switch (Port 2) > RP3 >>> >>> Port 2 is mirror of Port 1. And used the weewx-interceptor driver to >>> process the data. >>> >>> On Wednesday, October 17, 2018 at 10:39:49 AM UTC-4, Gabe wrote: >>> >>>> Trying to see if I can get the smarthub connected directly into the Pi >>>> since I can't redirect DNS with Google Wifi (not enough advanced settings) >>>> >>>> >>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
