Is your smarthub directly connected to the RPI? On Saturday, October 27, 2018 at 7:06:14 PM UTC-4, Gabe wrote: > > Thanks! Works! Except Belchersking giving me > > Generate failed with exception '<type 'exceptions.ValueError'>' > > but that's not related to acurite :) > > On Saturday, October 27, 2018 at 7:04:16 PM UTC-4, rich T wrote: >> >> Here is my mapping: >> >> [[sensor_map]] >> >> # bridge >> >> barometer = pressure.00001532.* >> >> # tower >> >> outTemp = temperature.00001532.* >> outHumidity = humidity.00001532.* >> windSpeed = windspeed.00001532.* >> windDir = winddir.00001532.* >> rain = rainfall.00001532.* >> >> # Indoor Sensor (Backroom) >> >> inTemp = temperature.00008397.* >> inHumidity = humidity.00008397.* >> >> >> >> On Saturday, October 27, 2018 at 3:32:24 PM UTC-4, Gabe wrote: >>> >>> More specifically, I have no idea how to setup the sensor_map section of >>> weewx.conf, I don't know how to get the inTemp = temperature.06022.* >>> sensor ids >>> >>> On Thursday, October 18, 2018 at 7:47:13 PM UTC-4, rich T wrote: >>>> >>>> Here is my configuration: >>>> >>>> Smarthub >(Port 1) Managed Switch (Port 2) > RP3 >>>> >>>> Port 2 is mirror of Port 1. And used the weewx-interceptor driver to >>>> process the data. >>>> >>>> On Wednesday, October 17, 2018 at 10:39:49 AM UTC-4, Gabe wrote: >>>> >>>>> Trying to see if I can get the smarthub connected directly into the Pi >>>>> since I can't redirect DNS with Google Wifi (not enough advanced settings) >>>>> >>>>> >>>>>
-- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
