By the way the outdoor unit doesnt have the barometer, interestingly the barometer is in the display unit confirmed by Ambient Weather support
On Sat, Jan 26, 2019 at 12:08 AM Adnan Mumtaz <[email protected]> wrote: > Its on a pole the reading is correct on the main display, it all happened > after i re-calibrated barometer relative pressure on the display unit , it > looks like weewx is calculating something else, but MQTT gets the correct > reading, right now the reading on the display unit is 1019.6 > > On Fri, Jan 25, 2019 at 11:45 PM Scott Grayban <[email protected]> wrote: > >> That's odd. Did you mount the WS on a pole or is it still laying on the >> roof ? >> >> On Friday, January 25, 2019 at 12:36:39 PM UTC-8, Adnan Mumtaz wrote: >>> >>> Open riyadhweather.com and notice the barometer reading changes, gives >>> 3 readings when it retrieves data using and one is correct only >>> >>> On Friday, 25 January 2019 23:29:01 UTC+3, Scott Grayban wrote: >>>> >>>> ??? >>>> >>>> On Friday, January 25, 2019 at 6:37:43 AM UTC-8, Adnan Mumtaz wrote: >>>>> >>>>> Everything seemed fine , i calibrated the barometer on the display >>>>> unit and since then Im seeing a different in barometer MQTT data update >>>>> with the real data, it shows real data and then shows a wrong data and it >>>>> keeps going on like this, >>>>> >>>>> On Wednesday, 23 January 2019 16:48:27 UTC+3, Adnan Mumtaz wrote: >>>>>> >>>>>> Thanks I will try it too, like this template too >>>>>> >>>>>> On Wed, Jan 23, 2019 at 4:06 AM steeple ian <[email protected]> >>>>>> wrote: >>>>>> >>>>>>> Adnan, >>>>>>> >>>>>>> Yes I can confirm that you can run weather34 alongside any other >>>>>>> skin. The install process is slightly different from a regular weeWX >>>>>>> skin >>>>>>> but it works just fine with any other skin alongside. >>>>>>> >>>>>>> Ian >>>>>>> >>>>>>> On 22 Jan 2019, at 21:39, Adnan Mumtaz <[email protected]> wrote: >>>>>>> >>>>>>> Thanks Scott, you are so helpful. Ever tried Weather34 template >>>>>>> using weewx ? Is it possible to run 2 templates? >>>>>>> >>>>>>> On Tue, Jan 22, 2019 at 10:50 PM Scott Grayban <[email protected]> >>>>>>> wrote: >>>>>>> >>>>>>>> There are a few ways to do this... >>>>>>>> >>>>>>>> https://www.raspberrypi.org/documentation/linux/filesystem/backup.md >>>>>>>> >>>>>>>> On Monday, January 21, 2019 at 8:24:40 PM UTC-8, Adnan Mumtaz wrote: >>>>>>>>> >>>>>>>>> Wonder how can I take a backup of all what I did. >>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "weewx-user" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>> send an email to [email protected]. >>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>> >>>>>>> >>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-user" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-user" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>> >>>>>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
