Changed the below two calculations from prefer_hardware to hardware only
and now weewx is not re-calculating the figures.
[[Calculations]]
pressure = hardware
barometer = hardware
On Saturday, 26 January 2019 00:18:41 UTC+3, Scott Grayban wrote:
>
> Correct -- the barometer is calculated by the console. So what you have
> now are 2 different readings, 1 from the console and the one calculated by
> weewx.
>
> On Friday, January 25, 2019 at 1:10:02 PM UTC-8, Adnan Mumtaz wrote:
>>
>> By the way the outdoor unit doesnt have the barometer, interestingly the
>> barometer is in the display unit confirmed by Ambient Weather support
>>
>> On Sat, Jan 26, 2019 at 12:08 AM Adnan Mumtaz <[email protected]> wrote:
>>
>>> Its on a pole the reading is correct on the main display, it all
>>> happened after i re-calibrated barometer relative pressure on the display
>>> unit , it looks like weewx is calculating something else, but MQTT gets the
>>> correct reading, right now the reading on the display unit is 1019.6
>>>
>>> On Fri, Jan 25, 2019 at 11:45 PM Scott Grayban <[email protected]>
>>> wrote:
>>>
>>>> That's odd. Did you mount the WS on a pole or is it still laying on the
>>>> roof ?
>>>>
>>>> On Friday, January 25, 2019 at 12:36:39 PM UTC-8, Adnan Mumtaz wrote:
>>>>>
>>>>> Open riyadhweather.com and notice the barometer reading changes,
>>>>> gives 3 readings when it retrieves data using and one is correct only
>>>>>
>>>>> On Friday, 25 January 2019 23:29:01 UTC+3, Scott Grayban wrote:
>>>>>>
>>>>>> ???
>>>>>>
>>>>>> On Friday, January 25, 2019 at 6:37:43 AM UTC-8, Adnan Mumtaz wrote:
>>>>>>>
>>>>>>> Everything seemed fine , i calibrated the barometer on the display
>>>>>>> unit and since then Im seeing a different in barometer MQTT data update
>>>>>>> with the real data, it shows real data and then shows a wrong data and
>>>>>>> it
>>>>>>> keeps going on like this,
>>>>>>>
>>>>>>> On Wednesday, 23 January 2019 16:48:27 UTC+3, Adnan Mumtaz wrote:
>>>>>>>>
>>>>>>>> Thanks I will try it too, like this template too
>>>>>>>>
>>>>>>>> On Wed, Jan 23, 2019 at 4:06 AM steeple ian <[email protected]>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> Adnan,
>>>>>>>>>
>>>>>>>>> Yes I can confirm that you can run weather34 alongside any other
>>>>>>>>> skin. The install process is slightly different from a regular weeWX
>>>>>>>>> skin
>>>>>>>>> but it works just fine with any other skin alongside.
>>>>>>>>>
>>>>>>>>> Ian
>>>>>>>>>
>>>>>>>>> On 22 Jan 2019, at 21:39, Adnan Mumtaz <[email protected]> wrote:
>>>>>>>>>
>>>>>>>>> Thanks Scott, you are so helpful. Ever tried Weather34 template
>>>>>>>>> using weewx ? Is it possible to run 2 templates?
>>>>>>>>>
>>>>>>>>> On Tue, Jan 22, 2019 at 10:50 PM Scott Grayban <[email protected]>
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>> There are a few ways to do this...
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> https://www.raspberrypi.org/documentation/linux/filesystem/backup.md
>>>>>>>>>>
>>>>>>>>>> On Monday, January 21, 2019 at 8:24:40 PM UTC-8, Adnan Mumtaz
>>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>> Wonder how can I take a backup of all what I did.
>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>> Google Groups "weewx-user" group.
>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>>>> send an email to [email protected].
>>>>>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>>> Groups "weewx-user" group.
>>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>>> send an email to [email protected].
>>>>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>>> Groups "weewx-user" group.
>>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>>> send an email to [email protected].
>>>>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>>>>
>>>>>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "weewx-user" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an email to [email protected].
>>>> For more options, visit https://groups.google.com/d/optout.
>>>>
>>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
