This thread makes interesting reading. Have a Misol console type HP3010 (which probably is a next version/clone of HP3000), and assume therefore that the discussed HP3000-driver will be applicable. 5 Sensors attached. At processor-side have a configuration with Raspbian Buster on Raspberry_Zero_W Lacking a better choice set WeeWX for 'Simulator' [or should that better be FineOffset WS3000?] The 5 Sensors not yet included in weewx.conf
For my configuration the manuals on github etc. needed some tweaking, because during installation the files arrived at other places. Now got the pieces operational, but the overall result is negative: no read-out visible from the console, and the web-interface is fixed/fake. *Any hints for next steps?* Op dinsdag 30 oktober 2018 17:49:35 UTC+1 schreef [email protected]: > > Here is an updated version of the driver, including: > - the fix for sub-zero temperatures > - improved error handling/retry (something that wasn't working properly > before) > - the usb timeout is now a configuration setting > - additional comments > > It probably won't fix the root cause of the 'crash' issue, but at least it > should now properly retry so the problem might be more transparent. And the > error reporting will be more useful to figure out what's wrong should an > exception occur. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/8dc00070-ebda-42d9-9110-b56adda2474c%40googlegroups.com.
