Sorry, small typing-mistake: my console is Misol HP3001 Op zondag 9 februari 2020 14:02:30 UTC+1 schreef Ton vanN: > > This thread makes interesting reading. > > Have a Misol console type HP3010 (which probably is a next version/clone > of HP3000), and assume therefore that the discussed HP3000-driver will be > applicable. > 5 Sensors attached. > At processor-side have a configuration with Raspbian Buster on > Raspberry_Zero_W > Lacking a better choice set WeeWX for 'Simulator' [or should that better > be FineOffset WS3000?] > The 5 Sensors not yet included in weewx.conf > > For my configuration the manuals on github etc. needed some tweaking, > because during installation the files arrived at other places. > Now got the pieces operational, but the overall result is negative: > no read-out visible from the console, and the web-interface is fixed/fake. > > *Any hints for next steps?* > > Op dinsdag 30 oktober 2018 17:49:35 UTC+1 schreef [email protected]: >> >> Here is an updated version of the driver, including: >> - the fix for sub-zero temperatures >> - improved error handling/retry (something that wasn't working properly >> before) >> - the usb timeout is now a configuration setting >> - additional comments >> >> It probably won't fix the root cause of the 'crash' issue, but at least >> it should now properly retry so the problem might be more transparent. And >> the error reporting will be more useful to figure out what's wrong should >> an exception occur. >> >
-- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/e948c3b8-761a-4bc8-8d8d-136d22184a2d%40googlegroups.com.
