This thread makes interesting reading. Have a Misol console type HP3001 (which probably is a next version/clone of HP3000), and assume therefore that the discussed HP3000/WS3000-driver will be applicable. 5 Sensors attached. At processor-side have a configuration with Raspbian Buster on Raspberry_Zero_W Installed ss described by Jack Stromberg at https://jackstromberg.com/2018/06/setting-up-weewx-with-a-raspberry-pi/ Lacking a better choice set WeeWX for 'Simulator' Seems to work.
Next step is installation of the WS3000-driver, reconfig with that driver and then restart incl. de USB-interface to the Console of WS3000/HP300x Have read the attachment to previous message, but NOOB needing simple instructions. *Any hints for the next steps?* Op dinsdag 30 oktober 2018 17:49:35 UTC+1 schreef [email protected]: > > Here is an updated version of the driver, including: > - the fix for sub-zero temperatures > - improved error handling/retry (something that wasn't working properly > before) > - the usb timeout is now a configuration setting > - additional comments > > It probably won't fix the root cause of the 'crash' issue, but at least it > should now properly retry so the problem might be more transparent. And the > error reporting will be more useful to figure out what's wrong should an > exception occur. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/a6439b41-4926-4fc9-915b-bb1319348ac1%40googlegroups.com.
