Olivier, Perhaps the underlaying Linux_version makes a difference. In my configuration it is Raspian_Buster_Lite.
Anton Op dinsdag 11 februari 2020 22:29:08 UTC+1 schreef Ton vanN: > > Olivier, > > Puzzled, because apparently weewx has been installed in my configuration > in a different way than you expect. > See the inserted text. > > ;-( Some more thinking to be done ... > Waiting for your next suggestions. > > Anton > > Op dinsdag 11 februari 2020 20:17:29 UTC+1 schreef Olivier Guyotot: >> >> Alright, so the good news is that the vendor_id and product_id are still >> the same. >> >> NOTE: I just noticed that in your configuration, you specified driver = >> user.hp3000. Unless you made a change, it should be driver = user.ws3000. >> > Where did you see this info? > Or otherwise formulated: where shal I put such line? > > >> Assuming that you installed the driver correctly in the bin/user >> directory, >> > In my configuration no folder /bin/user; therefore created and put > ws3000.py in that folder with x-attribute set, to enable execution > Most weewx-files found in folder /etc/weewx > > to check if the current code is working with your station you could try >> the following: >> 1. first, stop weewx. >> 2. from the weewx folder, run the command: >> PYTHONPATH=bin python bin/user/ws3000.py >> >> To get this running from Putty's CLI, I had to change into > PYTHONPATH=bin python /bin/user/ws3000.py > > Result is that the execution stops at the first comment-line. > At least positive is that ws3000.py has been found and is executed. > Have taken out all comment lines from ws3000.py between """ and """ > Then running > PYTHONPATH=bin python /bin/user/ws3000.py > => result is an error report telling > File "/bin/user/ws3000.py", line 17, in <module> > import weewx.drivers > ImportError: No module named weewx.drivers > > Then stopped, to write this response ..... > > NOTE: you may have to replace the 'logdbg' statements by 'print', lines >> 624 and 626, if you don't see the data (check in the logs first). >> >> Something else that you could try is to enable debug in the weewx >> configuration file (debug = 1), start weewx, and send me the log. >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/a18dff77-f766-4dfd-b2ca-f9f2969569c9%40googlegroups.com.
