Not as familiar with Cisco so this may be moot... Can you change the supported rates separate from the basic rates?
-Emerson -----Original Message----- From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:[EMAIL PROTECTED] On Behalf Of Toivo Voll Sent: Tuesday, November 18, 2008 1:23 PM To: [email protected] Subject: Re: [WIRELESS-LAN] WII association with Cisco 1200 with no 1Mbps or 2Mbps We ran into something similar with Nintendo DS. On them, you must have 1 or 2 Mbps as basic rates (beacons and broadcasts) enabled on the network, or they will simply not work. So you're stuck deciding between supporting Nintendo or running a network with sane throughput. Here are the details: http://www.nintendo.com/consumer/wfc/en_na/ds/wrSetupHelp.jsp No idea about the Wii though, but I'm curious. We do have a fair bit of them around. On Tue, Nov 18, 2008 at 12:00 PM, Legge, Jeffry <[EMAIL PROTECTED]> wrote: > We have disabled 1Mbps and 2Mbps on all our Cisco 1200 wireless APs. > We have Wii's trying to connect and they require the 2Mbps data rate > and they fail to associate. Does anyone know how to disable the 1Mbps > and 2Mbps data rates on the Wii? -- Toivo Voll Network Administrator Information Technology Communications University of South Florida ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
