That one has 7 sections and mine has 5. I never found the specs for
base. I'll keep looking. Lonnie Nunweiler wrote: http://bold98.org/gallery/ProjectsTowerPlease read this and the manual from the site. You do not have nearly enough concrete for the base. Lonnie On 8/21/05, Brian Rohrbacher <[EMAIL PROTECTED]> wrote:I dug a hole 32 inch square by 42 inches deep yesterday for a rohn bx tower. It is 5 sections of 8 ft. I just got 15 bags of portland cement and will add my own gravel. I was thinking about three 1 1/2 inch pieces of pipe stuck in the concrete to bolt the tower legs to. I will thread and put couplers on the pipe at 22 inches so they can't move. I've got some re-bar to chuck down in the hole too. I've got 3 8ft ground rods and will bond with #4 bare stranded wire. I picked up a load of grade 8 bolts, washers, and lock washers for bolting the tower together and to the pipe stubs. Anyone have any suggestions for me? This is my first tower. I will pour tomorrow afternoon. brian -- WISPA Wireless List: [EMAIL PROTECTED] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ |
-- WISPA Wireless List: [EMAIL PROTECTED] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/