oops, here is where pages 9 and 10 are.
http://www.antennasystems.com/bxcatalog.pdf
Brian Rohrbacher wrote:
As close as I get is the info on page 9 and 10. All I want is the
dumb thing to say "dig a hole this by this for a 40 footer." I still
have no idea how big of a hole I need.
A. Huppenthal wrote:
The trouble with mixing your own cement is that there's *never*
really enough. Do a 4 x 4 foot pad that's 5 feet deep and you've got
lots of concrete. If a cement truck is not an option, rent a mixer.
Don't skimp on the plug, it's really hard to add concrete later.. :-)
Brian Rohrbacher wrote:
That one has 7 sections and mine has 5. I never found the specs for
base. I'll keep looking.
Lonnie Nunweiler wrote:
http://bold98.org/gallery/ProjectsTower
Please read this and the manual from the site. You do not have nearly
enough concrete for the base.
Lonnie
On 8/21/05, Brian Rohrbacher <[EMAIL PROTECTED]> wrote:
I dug a hole 32 inch square by 42 inches deep yesterday for a rohn bx
tower. It is 5 sections of 8 ft. I just got 15 bags of portland
cement and will add my own gravel.
I was thinking about three 1 1/2 inch pieces of pipe stuck in the
concrete to bolt the tower legs to. I will
thread and put couplers on the pipe at 22 inches so they can't
move. I've got some re-bar to chuck down in the hole too.
I've got 3 8ft ground rods and will bond with #4 bare stranded
wire. I picked up a load of grade 8 bolts,
washers, and lock washers for bolting the tower together and to
the pipe stubs. Anyone have any suggestions
for me? This is my first tower. I will pour tomorrow afternoon.
brian
--
WISPA Wireless List: [EMAIL PROTECTED]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
WISPA Wireless List: [EMAIL PROTECTED]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/