Mark, go over to http://www.mikrotik.com/download.html#dude
See if it does some/all of what you need.
As for limiting/shaping, your 3640 may do what you need.
John
Mark Nash wrote:
I'm at the point on my network now that I really need to control
unnecessary bandwidth usage. The biggest problem is the p2p users
with their excessive upload, and worms come in a close second.
My network is comprised of a Cisco 3640, Cisco C4840G L3 switch for
segmenting, and Dell 3324 managed switches. I have run ntop in the
past but I believe it only reports interactively through the web
interface. I wouldn't consider myself too far off from obtaining an
SNMP station/software like SNMPc.
I'm needing to implement a solution that will monitor, alert on, and
control this type of traffic. Either not pass it or rate-limit it.
I'm interested in solutions that have been implemented, home-grown,
tested, failed, etc.
Thanks in advance...
Mark Nash
Network Engineer
UnwiredOnline.Net
325 Holly Street
Junction City, OR 97448
http://www.uwol.net
541-998-5555
541-998-5599 fax
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
