Go to some of the hard core LMR delers and ask for isolators, (They will cut your power in half).  Your LMR dealer will need to know power, frequency, type of connectors.  This may work, I do not know.
----- Original Message -----
Sent: Monday, January 16, 2006 5:14 AM
Subject: RE: [WISPA] Multiple Radios on Single antenna

Radios are WRAP/CM9's with StarOS on RadioWaves SPD2-5.2NS. Is there
anything special you do/use to get this to work? Only things I can see that
would help are band pass filters.

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Bob Moldashel
Sent: 15 January 2006 23:53
To: WISPA General List
Subject: Re: [WISPA] Multiple Radios on Single antenna

I should revise that to say we do it on dual polarity antennas.  Not 2
radios on one antenna....

-B-



Bob Moldashel wrote:

> Paul,
>
> We do this all the time.  Explain what model radios and how you are
> doing this??  I'll try to help.....
>
> -B-
>
>
>
>
> Paul Hendry wrote:
>
>> Has anyone successfully installed more than 1 radio on a single
>> antenna with virtually no interference between links? We had
>> originally planned to run 2 simultaneous links on dual polarized 5GHz
>> RadioWaves parabolics however once installed we found that only 1
>> link could be used at any one time regardless of channel separation
>> due to interference. Now the set-up is being used to provide
>> redundancy but would much prefer double the capacity. If anyone has
>> achieved a similar thing would they share how they achieved it?
>> Hoping that some 5GHz band pass filters could be the answer but can
>> only locate 2.4 variants at present L
>>
>> 
>>
>> Cheers,
>>
>> 
>>
>> P.
>>
>> 
>



--
Bob Moldashel
Lakeland Communications, Inc.
Broadband Deployment Group
1350 Lincoln Avenue
Holbrook, New York 11741 USA
800-479-9195 Toll Free US & Canada
631-585-5558 Fax
516-551-1131 Cell

--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.371 / Virus Database: 267.14.17/229 - Release Date: 13/01/2006
 

--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.371 / Virus Database: 267.14.18/230 - Release Date: 14/01/2006
 

--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/
-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to