Anyone have a source for a power supply like this?

Mark McElvy wrote:

I am surprised no one has mentioned this. I looked up power consumption
on the SR5 and it shows 800 to 1300 mA each. You state your power supply
is 700mA. I did not look up power consumption for the RB532 but I would
think you would need at least a 3A supply.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Brian Rohrbacher
Sent: Tuesday, September 12, 2006 11:51 AM
To: WISPA General List
Subject: Re: [WISPA] MT power supplies

So, does anyone know if it looks like I would be fine on the power side of things?
I have tweaked the ethernet port settings for no gain.

Next step is to get climbing 280ft to replace board, but I'd like to confirm power first.

Brian

Brian Rohrbacher wrote:

I have a RB 532 on 300 foot of cat 5 with 2 sr5.
I'm using poe 48v .700a power supply.
I'm seeing weirdness.

Do I have enough "juice"

Brian

--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to