Yes... MT in combination with the SBE card will cause lockups. Never
found a fix, instead just had to replace with a different solution.
Travis
Microserv
Sam Tetherow wrote:
Ron, when I was at 2xT1 I was running it through a RB230 without any
issues for BW shaping (only a couple of queues). I don't think it is
MT in particular that is the problem. Could be the specific hardware
that is the issue though.
I am currently running 45MB through a 3.0GHz MT box with an SBE
interface and it handles the bandwidth just fine, although I am having
some locking problems from time to time, but I think they are related
to the sbe DS3 card as opposed to MT itself.
Sam Tetherow
Sandhills Wireless
Ron Wallace wrote:
To All,
I have had a good system. I have a 3 Mbps Bonded T1, 100 users. Right
now when I run a speed test to Speakeasy, it starts at 2.6 or2.7 mbps
and quickly windsdown to 15-20 kbps. This is only in the evening and
from 7-9AM. I have a MikroTik in P3 900MHz, w/ 500Mb of ram.
Thisonlyhappens across theMikroTik box. Any ideas, Mycustopmers are
pissed. Some Are threatening to quit.
PLEASE HELP, I'M A DUNCE.
Ron Wallace Hahnron, Inc. 220 S. Jackson Dt. Addison, MI 49220
Phone: (517)547-8410 Mobile: (517)605-4542 e-mail:
[EMAIL PROTECTED] [EMAIL PROTECTED]
--
WISPA Wireless List: [EMAIL PROTECTED]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/