How do you know when power is out? How do you know how much run-time you have left?

Travis


Scott Reed wrote:
Because for the cost I get 14 hours on my MeanWell/battery combination 
and about 4 on a UPS with the same batteries.  UPS/inverter uses a lot 
of the power to make the 120VAC.  Then I need a power supply to make it 
24VDC, which wastes more.  Using the MeanWell, or the unit Kurt 
mentions, allows 1 power supply to provide the DC I need without 
wasteful conversions.
The monitoring is nice and I have that at a couple of sites, but this 
has been working great for me.

Travis Johnson wrote:
  
Why not use an actual APC UPS and extra batteries? That way you can 
monitor the power, have an estimate of run-time when the power goes out, 
and get email alerts.

Travis
Microserv

Kurt Fankhauser wrote:
  
    
I am starting to put everything on a 24v setup of the APC 7/13ah batteries
with a Battery Tender (batterytender.com) The battery tender acts like a
constant power source and charge controller all in one. This works really
well as I can set up a site for around $175 and get 6-24 hours runtime
depending on what I have hooked to it. Way better than any UPS.

Kurt Fankhauser
WAVELINC
P.O. Box 126
Bucyrus, OH 44820
419-562-6405
www.wavelinc.com
 
 
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On
Behalf Of Patrick Nix Jr.
Sent: Thursday, April 24, 2008 7:03 PM
To: [email protected]
Subject: [WISPA] A good battery solution

Any ideas on an inexpensive but effective battery solution for remote
tower location... would like to keep equipment powered 6-8 hours w/o
electric.  Equipment includes 1 mikrotik, 1 trango Link45 and 1 trango
M900AP

 

Thanks

 

__________________________________________

 

Patrick Nix, Jr.,

csweb.net

(800) 638-2614

http://www.csweb.net <http://www.csweb.net/> 

E-Mail: [EMAIL PROTECTED]

 

====================================================================

ATTENTION: This e-mail may contain information that is confidential in
nature. If you are not the intended recipient, please delete this e-mail
and notify the sender immediately. Thank you.

====================================================================

 



----------------------------------------------------------------------------
----
WISPA Wants You! Join today!
http://signup.wispa.org/
----------------------------------------------------------------------------
----
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/



--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/


  
    
      
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

  
    

  

--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to