Marlon, I have not used the units shipping from Deliberent yet, just the ones previously shipped from the Ligowave side, so not sure what firmware changes yours has. It is clear that Deliberent/Ligowave is making a transition on how they are aligning their product lines.
But one thing I can tell you for sure is, Ligowave/Deliberent has an EXCELLENT support team. If something is not working as it should, they are usually willing to look at your config file, if you Email it to them, to either identify any errors with config, whether it was a code bug or misconfig. And if a code bug, they usually have it fixed ASAP. I can also tell you their hardware has been rock solid, down to the pigtail, for us. As for the slow software problem.... yes, its a big problem. Not so much for configuring, but when your customers are down and troubleshooting under fire...... :-( It would have been the death of the product, if it wasn't addressed. But from what I hear the new Flex backend under Beta is the answer. Unfortunately, still software in development. But I'm eager to see what they come up with. There are so many upsides to this company. Tom DeReggi RapidDSL & Wireless, Inc IntAirNet- Fixed Wireless Broadband ----- Original Message ----- From: "Bob Moldashel" <[EMAIL PROTECTED]> To: "WISPA General List" <[email protected]> Sent: Monday, October 06, 2008 6:53 PM Subject: Re: [WISPA] deliberant/ligowave > Hey Marlon, > > Is it safe to say that you have some issues with this unit??? > > :-P > > Hope all is well.... > > -B- > > > > > > Marlon K. Schafer wrote: >> Hi All, >> >> I just installed my first radio from these guys. (Anyone know if it's >> the >> same company????) I'm tossing out my very first thoughts as I'm still at >> the customer's location, this is as raw as it'll get. >> >> First thing I noticed was a box that said Deliberant and a radio that >> said >> LigoWave. Probably the same company but it would be nice if the stickers >> matched. >> >> Next, no polarity marking of any kind on it. My guess of vertical being >> all >> stickers and connectors down seems to be correct. >> >> Nothing tells you how to put the outdoor connector together. I've done >> them >> before so I knew which way to put that tapered gasket in, but my first >> time >> I'm not sure I'd have gotten it right. >> >> No tech support phone number in the manual. If it's there I couldn't >> find >> it. >> >> The interface is slow. Definitely God's gift to the hourly wage guy. >> >> I'm trying this unit at a location that runs VPN and VoIP out of a home >> office. Ever since I installed an MT AP her Tranzeo CPQ unit does the >> disconnect thing and drops her calls and connections. Speeds are good, >> pings are good etc. But stuff just don't work. A Ubiquity at this >> location >> worked just fine till it decided it wasn't going to listen to the AP >> anymore >> (-90 or worse rssi when the replacement Tranzeo CPE unit had -65ish). >> >> This unit has a 40rssi. Whatever THAT means. I sure hate those random >> signal level meters. Give me the dB so that I can do a better job of >> troubleshooting. >> >> Never did get this unit to pass data in bridge mode. It would connect >> but I >> couldn't get more than 1 ping at a time to go. Web pages would start but >> not load. In router mode it works fine. >> >> Router mode has no port forwarding options. Not an issue this time, but >> without a working bridge mode I'll have to be careful where they get >> used. >> >> The hardware was easy to set up. No instructions offered, but none >> needed >> (other than the polarity sticker that needs to be there). >> >> Speeds are good. Seeing 7 to 9 megs down and up. Just like the original >> Tranzeo CPQ radio gives. >> >> Now to see if it'll stay connected and give stable service to the >> customer. >> >> laters, >> marlon >> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: [email protected] >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
