Gino, I had a 3' Radiowaves dish installed (for almost a year) on top of a 10ft 4.5" mast in a similar situation. I used the clamp linked below to attach it to the railing.
http://www.tessco.com/products/displayProductInfo.do?sku=482468&eventGroup=4&eventPage=1 - Matt Gino Villarini wrote: > Actually, check this pic... Its self explanatory... This is the only > setup we can do on the bldg... But we are left without a perpenticular > stabilizer... > > > Gino A. Villarini > [email protected] > Aeronet Wireless Broadband Corp. > tel 787.273.4143 fax 787.273.4145 > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Gino Villarini > Sent: Sunday, May 17, 2009 6:35 PM > To: WISPA General List > Subject: Re: [WISPA] How to stabilize Pole for 30" Drum Antenna? > > Well imagine that we have a big wall...were we would install a wall > mount base and the 4"pipe, the Pipe would potrude from the wall and the > antenna would be installed in the upper part of the pipe above from the > wall ... Point is we could install stabilizing arms to the pipe and the > wall... They would be parallel to the wall ... But we don't ahave any > other surface to intall a stabilizer in a perpenticular way to tha wall > > Clear? No? > > > Gino A. Villarini > [email protected] > Aeronet Wireless Broadband Corp. > tel 787.273.4143 fax 787.273.4145 > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Jack Unger > Sent: Sunday, May 17, 2009 6:29 PM > To: WISPA General List > Subject: Re: [WISPA] How to stabilize Pole for 30" Drum Antenna? > > Gino, > > Can you clarify what you mean by "parallel" and "perpendicular" > (relative to what)? > > jack > > > Gino Villarini wrote: > >> we are goint to mount a 30" 11 Ghz Drum in a bldg rooftop, we are >> goint to use a 4" Mast, any ideas on how to stabilize it? >> >> We have parallel atachment points but none perpenticular... any ideas >> on this? >> >> >> Gino A. Villarini >> [email protected] >> Aeronet Wireless Broadband Corp. >> tel 787.273.4143 fax 787.273.4145 >> >> >> >> >> ------------------------------------------------------------------------ >> >> ------------------------------------------------------------------------ >> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: [email protected] >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
