If there are adjacent channel rejection issues you can see degradation of the RSL level. Sent from my Verizon Wireless BlackBerry
-----Original Message----- From: m...@tc3net.com Date: Sat, 13 Jun 2009 17:24:09 To: WISPA General List<wireless@wispa.org> Subject: Re: [WISPA] Radio Seperation Yea, can't try that until Monday though. Was just sort of wondering if improper isolation would cause the issue I'm seeing, or if I need to keep looking for something else. Regards Michael Baird ----- Original Message ----- From: "Bob Moldashel" <lakel...@gbcx.net> To: "WISPA General List" <wireless@wispa.org> Sent: Saturday, June 13, 2009 5:13:10 PM GMT -05:00 US/Canada Eastern Subject: Re: [WISPA] Radio Seperation Michael, A quick test would be to shut off the other two sectors and see if your AP RSL goes up. If it does, you may have answered your question regarding channel separation. -B- m...@tc3net.com wrote: > We've just installed a 3 sector 2.4 setup, at 145' with maxrad 120's. I'm > noticing the receive sensitivity on the AP's are about 15-20 db's different > then what I see on the CPE's, tried a Tranzeo/Ubiquity radio. I'm using > Ubiquity AP's, and they work fine on another 3 sector setup I have, however > this tower is an A-Frame. The tower owner won't allow outside climbers so his > guy did it, and he put one on each leg at 145' back to back. If the radios > were too close together even on different channels, would the RX performance > on the AP exhibit this behavior? Only other change on this tower was RFLinx > Quarter-wave arrestors in line. > > If I'm 3-5 miles away I can see on the CPE a RSSI of -65 to -75 for example, > on the AP the reading would be in the -90 to not even below the noise floor. > > Any thoughts would be appreciated as always. > > Regards > Michael Baird > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/