If you are using plastic RJ45 with STP then you are wasting your time and 
money.

Scott Carullo
Brevard Wireless
321-205-1100 x102

-------- Original Message --------
> From: "Josh Luthman" <[email protected]>
> Sent: Monday, August 03, 2009 10:37 PM
> To: "WISPA General List" <[email protected]>
> Subject: Re: [WISPA] Defective Microtik
> 
> You lost me - drain wire?  Soldered onto a plastic rj45?
> 
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
> 
> "When you have eliminated the impossible, that which remains, however
> improbable, must be the truth."
> --- Sir Arthur Conan Doyle
> 
> 
> On Mon, Aug 3, 2009 at 10:27 PM, Jayson Baker 
<[email protected]>wrote:
> 
> > We also solder the drain wire from the cable onto the RJ45 connector 
after
> > we crimp it on.
> > Key is to ensure you have a good ground from A to Z.
> >
> > On Mon, Aug 3, 2009 at 8:26 PM, Josh Luthman 
<[email protected]
> > >wrote:
> >
> > > I am using shielded cable and Pac POEs andd lost all 3 APs here a 
few
> > > weeks ago.
> > >
> > > On 8/3/09, Jayson Baker <[email protected]> wrote:
> > > > Try using shielded cable, and you won't have a problem.
> > > > We're installed thousands in Colorado (second worst lightning in 
the
> > > > country, next to Florida) and everytime we install without 
shielded
> > > > cable-it's junk after a storm.  We use shielded cable on ALL
> > > > installs-customer installs as well.  And the good grounded 
PacWireless
> > > POE
> > > > injectors.  With thousands in service, it's rare we get a 
lightning
> > > related
> > > > service call.
> > > > We justify the extra couple dollars in cable by saving the cost of
> > truck
> > > > rolls, replacement equipment, and unhappy customers.
> > > >
> > > > On Mon, Aug 3, 2009 at 6:10 PM, Josh Luthman
> > > > <[email protected]>wrote:
> > > >
> > > >> Every 133 I used had a problem.  Be it software, hardware, DOA,
> > > lightning,
> > > >> whatever.  Out of dozens out there none survived and were 
replaced,
> > > >> necessarily, by a newer board.
> > > >>
> > > >> Josh Luthman
> > > >> Office: 937-552-2340
> > > >> Direct: 937-552-2343
> > > >> 1100 Wayne St
> > > >> Suite 1337
> > > >> Troy, OH 45373
> > > >>
> > > >> "When you have eliminated the impossible, that which remains, 
however
> > > >> improbable, must be the truth."
> > > >> --- Sir Arthur Conan Doyle
> > > >>
> > > >>
> > > >> On Mon, Aug 3, 2009 at 8:05 PM, Dennis Burgess <
> > [email protected]
> > > >> >wrote:
> > > >>
> > > >> > Nothing that I have seen.  Sure they were not repackaged by 
your
> > > vendor?
> > > >> > And/or like I suggested overclocked.
> > > >> >
> > > >> > -----Original Message-----
> > > >> > From: [email protected] 
[mailto:[email protected]
> > ]
> > > On
> > > >> > Behalf Of Forbes Mercy
> > > >> > Sent: Monday, August 03, 2009 6:53 PM
> > > >> > To: WISPA General List
> > > >> > Subject: [WISPA] Defective Microtik
> > > >> >
> > > >> > Is anybody having problems with R433AH's Microtik cards out of 
the
> > box
> > > >> > lately?  We purchased four this year so far and one beeped once 
only
> > > on
> > > >> > 18v not higher or loser voltages but it never beeped twice or 
got to
> > > an
> > > >> > interface we could use.
> > > >> >
> > > >> > We just installed another one and it now is giving kernel errors 
and
> > > >> > unless authenticate all is on everyone loses registration every 
few
> > > >> > hours.  We updated the firmware but with no positive result.
> > > >> >
> > > >> > My costs for tower climbers and anger from the 150 customers on 
the
> > > >> > radio that went bad the day after we installed it is getting 
costly
> > > and
> > > >> > wearing on my staff.  We're going back right now to reinstall 
the
> > old
> > > >> > 133 board.  Any others having these problems?
> > > >> >
> > > >> > Forbes Mercy
> > > >> > President - Washington Broadband, Inc.
> > > >> >
> > > >> >
> > > >> >
> > > 
------------------------------------------------------------------------
> > > >> > --------
> > > >> > WISPA Wants You! Join today!
> > > >> > http://signup.wispa.org/
> > > >> >
> > > 
------------------------------------------------------------------------
> > > >> > --------
> > > >> >
> > > >> > WISPA Wireless List: [email protected]
> > > >> >
> > > >> > Subscribe/Unsubscribe:
> > > >> > http://lists.wispa.org/mailman/listinfo/wireless
> > > >> >
> > > >> > Archives: http://lists.wispa.org/pipermail/wireless/
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >>
> > >
> > 
----------------------------------------------------------------------------
----
> > > >> > WISPA Wants You! Join today!
> > > >> > http://signup.wispa.org/
> > > >> >
> > > >> >
> > > >>
> > >
> > 
----------------------------------------------------------------------------
----
> > > >> >
> > > >> > WISPA Wireless List: [email protected]
> > > >> >
> > > >> > Subscribe/Unsubscribe:
> > > >> > http://lists.wispa.org/mailman/listinfo/wireless
> > > >> >
> > > >> > Archives: http://lists.wispa.org/pipermail/wireless/
> > > >> >
> > > >>
> > > >>
> > > >>
> > > >>
> > >
> > 
----------------------------------------------------------------------------
----
> > > >> WISPA Wants You! Join today!
> > > >> http://signup.wispa.org/
> > > >>
> > > >>
> > >
> > 
----------------------------------------------------------------------------
----
> > > >>
> > > >> WISPA Wireless List: [email protected]
> > > >>
> > > >> Subscribe/Unsubscribe:
> > > >> http://lists.wispa.org/mailman/listinfo/wireless
> > > >>
> > > >> Archives: http://lists.wispa.org/pipermail/wireless/
> > > >>
> > > >
> > > >
> > > >
> > >
> > 
----------------------------------------------------------------------------
----
> > > > WISPA Wants You! Join today!
> > > > http://signup.wispa.org/
> > > >
> > >
> > 
----------------------------------------------------------------------------
----
> > > >
> > > > WISPA Wireless List: [email protected]
> > > >
> > > > Subscribe/Unsubscribe:
> > > > http://lists.wispa.org/mailman/listinfo/wireless
> > > >
> > > > Archives: http://lists.wispa.org/pipermail/wireless/
> > > >
> > >
> > >
> > > --
> > > Josh Luthman
> > > Office: 937-552-2340
> > > Direct: 937-552-2343
> > > 1100 Wayne St
> > > Suite 1337
> > > Troy, OH 45373
> > >
> > > "When you have eliminated the impossible, that which remains, 
however
> > > improbable, must be the truth."
> > > --- Sir Arthur Conan Doyle
> > >
> > >
> > >
> > >
> > 
----------------------------------------------------------------------------
----
> > > WISPA Wants You! Join today!
> > > http://signup.wispa.org/
> > >
> > >
> > 
----------------------------------------------------------------------------
----
> > >
> > > WISPA Wireless List: [email protected]
> > >
> > > Subscribe/Unsubscribe:
> > > http://lists.wispa.org/mailman/listinfo/wireless
> > >
> > > Archives: http://lists.wispa.org/pipermail/wireless/
> > >
> >
> >
> >
> > 
----------------------------------------------------------------------------
----
> > WISPA Wants You! Join today!
> > http://signup.wispa.org/
> >
> > 
----------------------------------------------------------------------------
----
> >
> > WISPA Wireless List: [email protected]
> >
> > Subscribe/Unsubscribe:
> > http://lists.wispa.org/mailman/listinfo/wireless
> >
> > Archives: http://lists.wispa.org/pipermail/wireless/
> >
> 
> 
> 
----------------------------------------------------------------------------
----
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> 
----------------------------------------------------------------------------
----
>  
> WISPA Wireless List: [email protected]
> 
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
> 
> Archives: http://lists.wispa.org/pipermail/wireless/ 




--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to