Computer probably got an pdate for the NIC that tweaked the driver. Do your radios have Ethernet statistics? You could connect the PC back to the radio and watch the stats to see if the Ethernet Interface is flapping. Then force the radio to 10HDX and see if the flapping stops.
- Jerry -----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Marlon K. Schafer Sent: Friday, August 06, 2010 9:27 AM To: WISPA General List Subject: [WISPA] computer won't connect to radio OK, here's a good one. Have a long term customer that can't get internet all of the sudden. Shows no cable plugged into his computer. Had him try a laptop, it worked fine. Next had him take his computer to a repair shop for a new nic card. His computer DID work in town though. Back home, it wouldn't work with the radio. So I went out there to check this out. My laptop would work just fine. His desktop wouldn't. I ended up installing a router and all is working nicely now. His computer will talk to the router, but going right to the radio we show no cable connected. Anyone seen this before? I assume this is being caused by some kind of voltage miss match that the other devices aren't as sensitive to? shrug marlon -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
