I have had Tranzeo radios go fubar so they only will connect if the connecting computer/nic is set at 10 Mb
Terry ----- Original Message ----- From: "Marlon K. Schafer" <o...@odessaoffice.com> To: "WISPA General List" <wireless@wispa.org> Sent: Friday, August 06, 2010 10:27 AM Subject: [WISPA] computer won't connect to radio > OK, here's a good one. > > Have a long term customer that can't get internet all of the sudden. > > Shows no cable plugged into his computer. > > Had him try a laptop, it worked fine. > > Next had him take his computer to a repair shop for a new nic card. His > computer DID work in town though. > > Back home, it wouldn't work with the radio. > > So I went out there to check this out. My laptop would work just fine. > His > desktop wouldn't. > > I ended up installing a router and all is working nicely now. His > computer > will talk to the router, but going right to the radio we show no cable > connected. > > Anyone seen this before? > > I assume this is being caused by some kind of voltage miss match that the > other devices aren't as sensitive to? > > shrug > marlon > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
