Glenn, My concern is I already have 58 clients on a MT AP. I need Double that. Your saying you don't see more than 50 working right. Please explain. UBNT says 300 Clients per AP no problem.
Steve Barnes RC-WiFi Wireless Internet Service<http://www.rcwifi.com/> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Glenn Kelley Sent: Monday, September 13, 2010 3:14 PM To: WISPA General List Subject: Re: [WISPA] Taking the plunge experience here shows sub 50 as a max - for the price point - it cannot be beat however On Sep 13, 2010, at 2:54 PM, Justin Wilson wrote: Polling is what makes systems like Canopy and Nstreme shine. The polling is different than the MIMO technology. Mimo is Antenna and TDMA is polling. 802.11 was never designed for outdoor so the polling is flawed for such purposes. I have seen 5ghz Mikrotik units with nstreme enabled that had 70 clients at 3meg burstable speeds. I am interested to see how many clients an airmax AP can handle. -- Justin Wilson <j...@mtin.net<x-msg://84/j...@mtin.net>> http://www.mtin.net/blog - xISP News http://www.twitter.com/j2sw - Follow me on Twitter Wisp Consulting - Tower Climbing - Network Support ________________________________ From: Steve Barnes <st...@pcswin.com<x-msg://84/st...@pcswin.com>> Reply-To: WISPA General List <wireless@wispa.org<x-msg://84/wireless@wispa.org>> Date: Mon, 13 Sep 2010 14:30:04 -0400 To: WISPA General List <wireless@wispa.org<x-msg://84/wireless@wispa.org>> Subject: Re: [WISPA] Taking the plunge Forbes, so are you saying: if I change and go to a Rocket with Airmax dual pol antenna and I have a client with a UBNT Bullet M2 HP Connected to a Laird 24Dbi Grid Vertical only dish, that even though the Bullet has Airmax as part of it, it wont connect. Or are you saying that all your clients need to be new with Airmax ability? Steve Barnes General Manager PCS-WIN <http://www.pcswin.com/> RC-WiFi Wireless Internet Service <http://www.rcwifi.com/> From: wireless-boun...@wispa.org<x-msg://84/wireless-boun...@wispa.org> [mailto:wireless-boun...@wispa.org] On Behalf Of Forbes Mercy Sent: Monday, September 13, 2010 2:11 PM To: WISPA General List Subject: Re: [WISPA] Taking the plunge >From personal experience I can tell you that you will be very happy when you >make the switch. I just replaced three Mikrotik BH/AP units, pings went from >their rather wild 30-120ms swings to a steady 15ms no matter what time. Just >be ready for three things, you can't put usernames in the ACL like Mikrotik, >there is less routing because UBNT expects filtering to be done in your router >before their equipment, and it will never go down because it's just a >transparent bridge so traffic that would have overwhelmed Mikrotik equipment >and crashed the LAN port won't happen on Ubiquity. Oh and you're right, I've >found that if you use dual-polarity you can't mix that with non-dual and >connections with non-, its far better to have all Airmax running rather than a >mix, this means replacing CPE so that all customers on that tower are the same >equipment, spendy (relative to UBNT's low cost) but worth it. Forbes Mercy Washington Broadband On 9/13/2010 10:31 AM, Steve Barnes wrote: All my APs are Mikrotik. My CPE's are a mix of Tranzeo and UBNT. I have a AP with 58 Clients on it and starting to get complaints about slowdowns. They are all setup 10 MHz channel 802.11g. This is a tower that due to contractual issues I cannot add anymore equipment. So I am considering taking down the Mikrotik and 120 degree sector and putting up a UBNT Rocket and Airmax 120 sector. It will take time to physically switch all my clients to new UBNT Airmax equipment but would like to get it done before the snow flies. Has anyone down this? Success? I know I cannot turn on Airmax till everyone is on the UBNT with that capability but does it work fine till you get it on? Steve Barnes RC-WiFi Wireless Internet Service <http://www.rcwifi.com/> -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org<x-msg://84/wireless@wispa.org> Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ ________________________________ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org<x-msg://84/wireless@wispa.org> Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org<mailto:wireless@wispa.org> Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ _____________________________________________________________________________________ Glenn Kelley | Principle | HostMedic |www.HostMedic.com Email: gl...@hostmedic.com<mailto:gl...@hostmedic.com> Pplease don't print this e-mail unless you really need to.
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
