USB was on selective suspend so I turned that off. Computer is set to never to go to sleep so it shouldn't have been doing anything. Unless that was a change to Windows 10 9879 this pause has never happened before. Naturally I'll keep an eye out for it. I started a debug version and attached gdb to it. So if it happens again tonight I can hopefully figure out why.
Mike W9MDB -----Original Message----- From: Bill Somerville [mailto:g4...@classdesign.com] Sent: Monday, December 01, 2014 9:28 AM To: wsjt-devel@lists.sourceforge.net Subject: Re: [wsjt-devel] Decoding stopped On 01/12/2014 13:25, Michael Black wrote: Hi Mike, > I'm running Windows 10, WSJT-X 1.5 r4693, and the hamlib integration > fork rev 3477. I have been keeping up with WSJT-X 1.5 changes pretty > much daily with few exceptions. > Also potentially relevant I'm using a signalink USB and an OMNI VII > with my own omnivii.c driver. > > I always leave my system running overnight. > > For the first time ever came in this morning and there were no decodes > on 40M for about the last 6 hours and the waterfall was not progressing. > > Everything on WSJT-X was operational. Turning Monitor on/off had no effect. > Went into File/Radio/Settings and did a "Test CAT" and it came back > green...still no decoding though...so serial I/O to the Omni appears > OK and not the problem. > What fixed it was going into File/Settings/Radio and changing the > Input over to my sound card and decoding started again. Then back > again to the Signalink and all is well. > > I've never had this happened before. I just started using the hamlib > integration fork but it doesn't appear to me that it was the problem > or my Omni driver since the Signalink USB shouldn't be related to that. I doubt this is anything related to rig control. The most likely culprit is a sound card issue, if it is a USB device then check the system and driver settings to make sure it is not allowed to go to sleep. > > I've not tried debugging a running instance yet. I assume it's just > running gdb to attach to the process and then setting a break point on > the decoding invocation to then trace why it's not progressing? > > Mike W9MDB 73 Bill G4WJS. ---------------------------------------------------------------------------- -- Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server from Actuate! Instantly Supercharge Your Business Reports and Dashboards with Interactivity, Sharing, Native Excel Exports, App Integration & more Get technology previously reserved for billion-dollar corporations, FREE http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ------------------------------------------------------------------------------ Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server from Actuate! Instantly Supercharge Your Business Reports and Dashboards with Interactivity, Sharing, Native Excel Exports, App Integration & more Get technology previously reserved for billion-dollar corporations, FREE http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
