I haven't had this happen in quite a while now. But I've been keeping up with the latest rev and am now on r5881.
Mike W9MDB On Sun, Sep 27, 2015 at 3:20 AM, Dave Halbakken <dhalbak...@gmail.com> wrote: > Hello Mike or anyone else, > > Did you ever solve the Windows 10 problem you describe in the message > below? > I have the same thing happening quite randomly, and your > change-the-soundcard fix makes things work again for me, too. I have turned > off all sleep and power shutdown things related to my USB soundcard, so I > don't think that is the issue. And, if it were the issue, the problem would > be more predictable. WSJT-X worked fine under Windows 7 before the upgrade. > > Dave HS0ZLG WA0PND > > > [wsjt-devel] Decoding stopped > From: Michael Black <mdblack98@ya...> - 2014-12-01 13:25:59 > > I'm running Windows 10, WSJT-X 1.5 r4693, and the hamlib integration fork > rev 3477. I have been keeping up with WSJT-X 1.5 changes pretty much daily > with few exceptions. > Also potentially relevant I'm using a signalink USB and an OMNI VII with my > own omnivii.c driver. > > I always leave my system running overnight. > > For the first time ever came in this morning and there were no decodes on > 40M for about the last 6 hours and the waterfall was not progressing. > > Everything on WSJT-X was operational. Turning Monitor on/off had no > effect. > Went into File/Radio/Settings and did a "Test CAT" and it came back > green...still no decoding though...so serial I/O to the Omni appears OK and > not the problem. > What fixed it was going into File/Settings/Radio and changing the Input > over > to my sound card and decoding started again. Then back again to the > Signalink and all is well. > > I've never had this happened before. I just started using the hamlib > integration fork but it doesn't appear to me that it was the problem or my > Omni driver since the Signalink USB shouldn't be related to that. > > I've not tried debugging a running instance yet. I assume it's just > running > gdb to attach to the process and then setting a break point on the decoding > invocation to then trace why it's not progressing? > > Mike W9MDB > > > > > > > > > > > ------------------------------------------------------------------------------ > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
------------------------------------------------------------------------------
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
