Give me the ALL.TXT entries from the test and the times you saw on logging and 
I'll figure out what's going on.
de Mike W9MDB

      From: Bill Somerville <[email protected]>
 To: [email protected] 
 Sent: Tuesday, February 7, 2017 9:50 AM
 Subject: Re: [wsjt-devel] WSJT-X: QSO start and end times
   
 On 07/02/2017 15:40, Black Michael wrote:
  
 How do you do the simulation? 
  The TIME_ON defaults to the logging time only when it hasn't been set yet.  
Currently only done when Tx 2 or 3 is clicked by either Next or Now. Are you 
simulating without clicking?  That might 'splain it. 
 Hi Mike, two instances of WSJT-X connected by a digital audio loop back. One 
with call A and one with call B. Both call using "CALL-A CALL-B" or "CALL-B 
CALL-A" as appropriate on alternate periods. I actually started one somewhat 
later than the other as is to be expected sometimes. Eventually I simulate A 
see a message from B (or vice versa) after a few periods by double clicking a 
decoded message. Some time later I do the same at the other instance. Repeat 
until both have sent and received 73 messages. All replies are delayed a few 
periods to simulate a poor communications channel. BTW the report I had of 
incorrect times was: "Sending a message containing 73 now generates a Start 
Time log entry 2 mins before the actual start of QSO.  This bug began with 
WSJT-X v1.7.1 r7555."
 When I looked into this I could see that there were many edge cases where QSO 
start time would not reflect reality.
  73
 Bill
 G4WJS.
  
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


   
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to