Hi: After the fun of about a thousand Qs and switching to 1.9, I started to get the "cannot find path specified" error message with every cycle.
I have attempted to reset "Location" in the Audio Save Directory with no success. Can someone please give me a pointer on how establish the path to direct the wave file. Thanks !!!! Jim W8CZN I have save set to "none" ---- Saku <oh...@sral.fi> wrote: > Hi! > > This small patch seems to stop duplicate decodes in > BandActivity/UDP/ALL.TEXTÂ and makes touching "CQ only" to take *effect > from next decode onwards*. > > Just what I tried to describe... > > -- > Saku > OH1KH > > > Bill Somerville kirjoitti 06.04.2018 klo 19:43: > > On 06/04/2018 17:39, Bill Somerville wrote: > >> this is not really a defect. If you have "CQ Only" checked then > >> non-CQ decodes are discarded and cannot be recovered. Un-checking the > >> option causes the decoder to redo the decode on the sample buffer. > >> The same applies to checking the "CQ Only" option except that CQ > >> decodes are discarded. If you do not want duplicated UDP Decode > >> messages nor duplicates in the ALL.TXT file then all I can suggest is > >> that you do not use the "CQ Only" option. BTW it is possible that the > >> repeated decode passes may have different results if the Rx audio > >> offset, decode depth, waterfall width, or AP settings have been changed. > > > > Fixing a critical typo: > > > > this is not really a defect. If you have "CQ Only" checked then non-CQ > > decodes are discarded and cannot be recovered. Un-checking the option > > causes the decoder to redo the decode on the sample buffer. The same > > applies to checking the "CQ Only" option except that *non-* CQ decodes > > are discarded. If you do not want duplicated UDP Decode messages nor > > duplicates in the ALL.TXT file then all I can suggest is that you do > > not use the "CQ Only" option. BTW it is possible that the repeated > > decode passes may have different results if the Rx audio offset, > > decode depth, waterfall width, or AP settings have been changed. > > > > 73 > > Bill > > G4WJS. > > > > > > ------------------------------------------------------------------------------ > > > > > > Check out the vibrant tech community on one of the world's most > > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > > _______________________________________________ > > wsjt-devel mailing list > > wsjt-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
