Hi again Bil
I did and some others did too. Not solved. Earlier I mentioned Remoterig
firmware. I tend to believe that the problem there is hardware related,
which makes the "cure" only viable in future HW release.
Bill, would that be so difficult to implement ? I think that rising each
line or both is quite close. Alternatively you could have the boxes to set
the lines high as in the CAT section. That would do it too.
Out of context it may seem to be unnecessary. However this is dear for
Remoterig users who use remote stations without a computer installed in the
far end, as myself. If I can't PTT with this COM, I loose a COM
functionality, which is a limited resource.
Anyway I thank you for evaluating the possibility to change this in a
future version.
Regards Fred
2018-07-08 17:34 GMT-03:00 Bill Somerville <[email protected]>:
> On 08/07/2018 21:24, Fred Carvalho wrote:
>
>> Bill, per my understanding we can only force CAT COM port
>> RTS/DTR signals to High. Not PTT COM. Am I wrong ?
>>
>> This problem is known by Remoterig users. Anyway, the implementation of
>> Remoterig requires that both lines go to HIGH to activate PTT. As I
>> explained it is an heritage of MMTTY which rises both lines.
>>
>> Regards Fred
>>
>
> HI Fred,
>
> I am sorry, you are correct and only the RTS and DTR signals of the CAT
> connection serial port can be controlled directly. Has anyone considered
> raising this issue with the Remoterig providers as it seems a very onerous
> requirement that is quite unnecessary.
>
>
> 73
> Bill
> G4WJS.
>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> wsjt-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
--
Fred - PY2XB
Other calls: PY2FXH, PY2FXH/W2, PY2XB/0, F/PY2XB, ZX2XB, PT7BXB,
PY2XB/PY0F, PQ0F, VP5/PY2XB, PW2IO (SA-071), ZX8W (SA-060), PY2XB/1
(SA-029), 8P9XB, PQ8XB (SA-045), ZX2S (SA-28), W4/PY2XB, 3D2XB, PY22XB,
PY0FX, W2/PY2XB, W9/PY2XB, VE3/PY2XB. Team member: PW2M (SA-071), PX8J
(SA-041), T30PY - T30SIX, PT0S, 9M0W
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
