My FTDX3000 works fine on FT8 on all bands except 60 meters. The FTDX3000 has preset channels. The channel in memory 3 is preset to 5.358.500. When I turn on Enable TX I can send one transmission. When the transmission is over, WSJT-X tries to set my VFO to 5.358.308. I don't know where this frequency is coming from because I manually added 5.358500 to the Frequency tab.
The FTDX3000 will not transmit on this frequency. I have to push the MCH/GRP button, then the V/M button to get back to 5.358.500. The next transmission the same thing happens. When transmit is finished, WSJTX sets the VFO back to 5.358.308 and transmit is locked out again. I have the Split operation set to NONE. I also tried Fake-It but that had the same result. I was able to make a contact by setting the Rig to NONE in the Radio tab and operate the PTT manually, but that is NOT a good option. What settings do I need to get it to work correctly?
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
