Plenty of vids on you tube to wideband the 3000. Eric J Evans FCC Licensed Amateur Radio Operator: *K4NDN* Elkton, Virginia 22827 Grid FM08qj 540.335.6178
On Wed, Nov 28, 2018 at 5:02 AM Claude Frantz <claude.fra...@bayern-mail.de> wrote: > On 11/28/18 12:29 AM, Mike Saeger wrote: > > > My FTDX3000 works fine on FT8 on all bands except 60 meters. > > The FTDX3000 has preset channels. The channel in memory 3 is preset to > > 5.358.500. > > Hi Mike, > > The XCVR's from Yaesu have often differences depending on the countries > where they are sold. This "configuration" is often done by solder > bridges in the XCVR. You can change these if you known what you are > doing. After such a modification of the bridges, a RESET of the XCVR is > often necessary at the next power on of the device. Then, all the > previous settings are lost. You have to set them again. > > The details are probably available in the maintenance manual. > > Best wishes, > Claude (DJ0OT) > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel