The only way that I have figured out is to wideband the Yaesu. I have not yet preformed this procedure, it seems fairly straightforward but my eyesight and fine motor skills are not what they used to be. I would be interested to know what other remedies are offered, if any please. de K4NDN
Eric J Evans Licensed Amateur Radio Operator Station K4NDN, Elkton, Virginia > On Nov 27, 2018, at 18:29, Mike Saeger <m...@thesaegers.com> wrote: > > My FTDX3000 works fine on FT8 on all bands except 60 meters. > The FTDX3000 has preset channels. The channel in memory 3 is preset to > 5.358.500. When I turn on Enable TX I can send one transmission. When the > transmission is over, WSJT-X tries to set my VFO to 5.358.308. > I don't know where this frequency is coming from because I manually added > 5.358500 to the Frequency tab. > > The FTDX3000 will not transmit on this frequency. I have to push the MCH/GRP > button, then the V/M button to get back to 5.358.500. The next transmission > the same thing happens. When transmit is finished, WSJTX sets the VFO back to > 5.358.308 > and transmit is locked out again. > > I have the Split operation set to NONE. I also tried Fake-It but that had the > same result. > > I was able to make a contact by setting the Rig to NONE in the Radio tab and > operate the PTT manually, but that is NOT a good option. > > What settings do I need to get it to work correctly? > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
