Hello Bill Somerville, I've read through many posts over the last couple months on both the Developer Forum & WSJT-X Group and I've see comments & requests to have Tx4 or Tx5 stay sticky and not move to the Tx6 CQ when operating in the responder versus caller (CQ) mode.
I think I recall from last year if the I placed a check mark in the 'Call 1st' box the program would move down to Tx6 CQ at the end of a contact, BUT if the box was NOT CHECKED the Auto seq would remain on the Tx5 73 and NOT ADVANCE to Tx6. The advantage of that was if I didn't get a return 73 I could quickly press 'Enable Tx' to resend my 73. Bill, am I recalling this wrong? Bill, because I operate >95% of the time Responding to CQs, not Sending CQs, I would like some way to have the Tx 4 and/or Tx 5 remain in place (sticky) at the end of each contact rather than advancing to Tx 6 CQ. Thanks, Stephen - K6SJT _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
