On 06/12/2018 17:26, Stephen Taylor - K6SJT wrote:
I think I recall from last year if the I placed a check mark in the 'Call
1st' box the program would move down to Tx6 CQ at the end of a contact, BUT
if the box was NOT CHECKED the Auto seq would remain on the Tx5 73 and NOT
ADVANCE to Tx6. The advantage of that was if I didn't get a return 73 I
could quickly press 'Enable Tx' to resend my 73. Bill, am I recalling this
wrong?
Bill, because I operate >95% of the time Responding to CQs, not Sending CQs,
I would like some way to have the Tx 4 and/or Tx 5 remain in place (sticky)
at the end of each contact rather than advancing to Tx 6 CQ.
Hi Steven,
if you uncheck the option "Settings->Reporting->Clear DX call and grid
after logging" then you get what you want and can be also ready to call
CQ or call another station. You can clear down the DX Call, DX grid, and
messages manually using the F4 keyboard shortcut. Agreed you need to
click twice to reselect Tx4 (RR73) or Tx5 (73) and re-send it, you are
also only two clicks away from calling CQ on a new Tx offset or a
double-click away from calling another station. That seems a fair
balance of usability between calling CQ, always replying to CQ calls,
repeating a message to complete a QSO, or starting a new QSO with
another station calling CQ. None of the options takes more than two
mouse clicks.
73
Bill
G4WJS.
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
