I sincerely doubt the "beneficial" -- without testing it doesn't make sense.
The 30dB level is as recommended in the Help and is the level needed to
overcome quantization errors. 30dB leaves some 60dB of head room for strong
signals (so AGC isn't needed which can squash weak signals).
Anything above 30dB is a waste based on all prior testing done by the WSJT-X
team.
MIke W9MDB
On Sunday, December 27, 2020, 08:39:55 AM CST, Adrian <[email protected]>
wrote:
It is still in the green zone and AGC is off. I find it beneficial on very weak
signals,
but I may play with lower levels.
On 28/12/20 12:03 am, Black Michael via wsjt-devel wrote:
Your bandwidth looks great... From the quick glance I could get of the WSJT-X
signal level it appears your RF gain is too high...you should set so you see
30dB on the WSJT-X meter on a quiet spot (like 5KHz below)
Mike W9MDB
On Sunday, December 27, 2020, 02:29:18 AM CST, Adrian <[email protected]>
wrote:
https://youtu.be/mVIcrqHl2QM
On 27/12/20 5:20 pm, Reino Talarmo wrote:
Hi Adrian,
It would be interesting to see your waterfall on a busy band like 20m. Also
all other bandwidth and carrier settings may be needed to make a fare
comparison and resolution what is "correct" for, say , widest reception
bandwidth and highest number of decoded.
73, Reino OH3mA
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
