Well after trying for some hard to get calls on 160m, seeing others
working the stations, they appeared, and were decoded after that
technique was used. I am always open to what works best.
On 28/12/20 12:45 am, Black Michael wrote:
I sincerely doubt the "beneficial" -- without testing it doesn't make
sense.
The 30dB level is as recommended in the Help and is the level needed
to overcome quantization errors. 30dB leaves some 60dB of head room
for strong signals (so AGC isn't needed which can squash weak signals).
Anything above 30dB is a waste based on all prior testing done by the
WSJT-X team.
MIke W9MDB
On Sunday, December 27, 2020, 08:39:55 AM CST, Adrian
<[email protected]> wrote:
It is still in the green zone and AGC is off. I find it beneficial on
very weak signals,
but I may play with lower levels.
On 28/12/20 12:03 am, Black Michael via wsjt-devel wrote:
Your bandwidth looks great...
From the quick glance I could get of the WSJT-X signal level it
appears your RF gain is too high...you should set so you see 30dB on
the WSJT-X meter on a quiet spot (like 5KHz below)
Mike W9MDB
On Sunday, December 27, 2020, 02:29:18 AM CST, Adrian
<[email protected]> <mailto:[email protected]> wrote:
https://youtu.be/mVIcrqHl2QM <https://youtu.be/mVIcrqHl2QM>
On 27/12/20 5:20 pm, Reino Talarmo wrote:
Hi Adrian,
It would be interesting to see your waterfall on a busy band like 20m. Also
all other bandwidth and carrier settings may be needed to make a fare
comparison and resolution what is "correct" for, say , widest reception
bandwidth and highest number of decoded.
73, Reino OH3mA
_______________________________________________
wsjt-devel mailing list
[email protected] <mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
<https://lists.sourceforge.net/lists/listinfo/wsjt-devel>
_______________________________________________
wsjt-devel mailing list
[email protected] <mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
<https://lists.sourceforge.net/lists/listinfo/wsjt-devel>
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
