Thank you for several suggestions about RFI, but unfortunately it is not. I get the same result without any radio connected whatsoever.

Daniel
SM6VFZ



On 9/25/21 11:27 AM, Alan via wsjt-devel wrote:
Hi, while that may work it's in my view better to find the source of any RFI and get rid of it.  

You never know what else it might be doing!

Try the setup on a dummy load and if it's then OK look at the antenna/feeder arrangement.

Alan G0TLK, sent from my mobile device

On 24 September 2021 23:50:24 Ari Paananen via wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote:

Hi Daniel,

Sounds like RF from your own transmissions is getting through to
the RasPi and disabling the USB-ports. Installing snap-on ferrites
to both ends of the USB-cables, Raspi power-wire and any other
possible connections might help.


On 25.9.2021 1:19, Bill Somerville via wsjt-devel wrote:
On 24/09/2021 23:09, Daniel Uppström via wsjt-devel wrote:
Hi,
On my Raspberry Pi 3 32 bit I get WSJT-X to stop the waterfall in 
FT-8 mode after I initiate a transmission. When the program starts 
the waterfall shows the FFT data as it should so I don't think this 
is a performance issue. But when transmitting, it just stops and 
doesn't start again until I restart the program.
I have asked this question earlier this year but didn't get a reply. 
Now I updated to WSJT-X 2.4.0 but the exact same problem is still 
there.

Any thoughts?

Daniel / SM6VFZ

Hi Daniel,

that may be an RFI issue, is your audio link to the rig using a USB 
interface?

73
Bill
G4WJS.



_______________________________________________
wsjt-devel mailing list



-- 
Avast Antivirus on tarkistanut tämän sähköpostin virusten varalta.



_______________________________________________
wsjt-devel mailing list



_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel



_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to